Buscar en Google Scholar
Título: Análisis comparativo sismo resistente usando aisladores con núcleo de plomo y deslizadores planos de fricción en una edificación de 3 niveles en el departamento de Apurímac - Provincia de Chincheros
Otros títulos: Comparative earthquake-resistant analysis using insulators with lead core and flat friction sliders in a 3-story building in the department of Apurímac - Province of Chincheros
Campo OCDE: https://purl.org/pe-repo/ocde/ford#2.01.01; https://purl.org/pe-repo/ocde/ford#2.00.00
Fecha de publicación: 21-jun-2024
Institución: Universidad Peruana de Ciencias Aplicadas (UPC)
Resumen: Debido a la ubicación geográfica de nuestro país y la cercanía al cinturón de fuego tenemos más riesgos de sufrir un sismo de gran magnitud. Por ello es urgente el uso de sistemas de protección sísmica en nuestras edificaciones esenciales aislando la superestructura del piso mediante el uso de aisladores sísmicos. En el presente trabajo de investigación seguiremos la siguiente secuencia: En primer lugar, fijaremos las propiedades del concreto, acero, tipo de cargas (carga muerta y carga viva), parámetros y características de la estructura. En segundo lugar, hallaremos el análisis estático considerando parámetros objetivos. En tercer lugar, hallamos el análisis dinámico modal de respuesta espectral. En cuarto lugar, se calculará las propiedades individuales y del sistema de los aisladores sísmicos con núcleo de plomo. En quinto lugar, se calculará las propiedades individuales y del sistema de los deslizadores planos de fricción. Finalmente, se obtendrá las derivas, periodos, desplazamientos y frecuencias de ambos modelos para elegir cuál de ellos tienen mejor desempeño ante un sismo de gran magnitud. El diseño sísmico de la estructura se ha efectuado según las recomendaciones de ASCE/SEI 07-22 “Mínimum Design Loads for Buildings and Other Structures”, NTE E.030 Diseño sismorresistente, R.M. 355-2018-VIVIENDA y NTE E.031 Aislamiento sísmico.

Due to the geographical location of our country and the proximity to the ring of fire, we have a greater risk of suffering a large earthquake. For this reason, it is urgent to use seismic protection systems in our essential buildings, isolating the superstructure from the floor through the use of seismic isolators. In this research work we will follow the following sequence: Firstly, we will establish the properties of the concrete, steel, type of loads (dead load and live load), parameters and characteristics of the structure. Secondly, we will find the static analysis considering objective parameters. Thirdly, we find the modal dynamic analysis of spectral response. Fourthly, the individual and system properties of the lead core seismic insulators will be calculated. Fifth, the individual and system properties of the flat friction sliders will be calculated. Finally, the drifts, periods, displacements and frequencies of both models will be obtained to choose which one has the best performance in the event of a large magnitude earthquake. The seismic design of the structure has been carried out according to the recommendations of ASCE/SEI 07-22 “Minimum Design Loads for Buildings and Other Structures”, NTE E.030 Seismic-resistant design, R.M. 355-2018-HOUSING and NTE E.031 Seismic isolation.
Enlace al repositorio: http://hdl.handle.net/10757/675295
Disciplina académico-profesional: Ingeniería Civil
Institución que otorga el grado o título: Universidad Peruana de Ciencias Aplicadas (UPC). División de Estudios Profesionales para Ejecutivos (EPE)
Grado o título: Ingeniero Civil
Jurado: Serrano Lazo, Malena Alessandra; Anza Moreau, Cesar Augusto
Fecha de registro: 16-ago-2024



Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons