Look-up in Google Scholar
Full metadata record
Lujan Lopez, Luis Alberto (es_PE)
Lujan Lopez, Jose Carlos (es_PE)
2024-08-16T18:14:43Z
2024-08-16T18:14:43Z
2024-06-21
http://hdl.handle.net/10757/675295
Debido a la ubicación geográfica de nuestro país y la cercanía al cinturón de fuego tenemos más riesgos de sufrir un sismo de gran magnitud. Por ello es urgente el uso de sistemas de protección sísmica en nuestras edificaciones esenciales aislando la superestructura del piso mediante el uso de aisladores sísmicos. En el presente trabajo de investigación seguiremos la siguiente secuencia: En primer lugar, fijaremos las propiedades del concreto, acero, tipo de cargas (carga muerta y carga viva), parámetros y características de la estructura. En segundo lugar, hallaremos el análisis estático considerando parámetros objetivos. En tercer lugar, hallamos el análisis dinámico modal de respuesta espectral. En cuarto lugar, se calculará las propiedades individuales y del sistema de los aisladores sísmicos con núcleo de plomo. En quinto lugar, se calculará las propiedades individuales y del sistema de los deslizadores planos de fricción. Finalmente, se obtendrá las derivas, periodos, desplazamientos y frecuencias de ambos modelos para elegir cuál de ellos tienen mejor desempeño ante un sismo de gran magnitud. El diseño sísmico de la estructura se ha efectuado según las recomendaciones de ASCE/SEI 07-22 “Mínimum Design Loads for Buildings and Other Structures”, NTE E.030 Diseño sismorresistente, R.M. 355-2018-VIVIENDA y NTE E.031 Aislamiento sísmico.
Due to the geographical location of our country and the proximity to the ring of fire, we have a greater risk of suffering a large earthquake. For this reason, it is urgent to use seismic protection systems in our essential buildings, isolating the superstructure from the floor through the use of seismic isolators. In this research work we will follow the following sequence: Firstly, we will establish the properties of the concrete, steel, type of loads (dead load and live load), parameters and characteristics of the structure. Secondly, we will find the static analysis considering objective parameters. Thirdly, we find the modal dynamic analysis of spectral response. Fourthly, the individual and system properties of the lead core seismic insulators will be calculated. Fifth, the individual and system properties of the flat friction sliders will be calculated. Finally, the drifts, periods, displacements and frequencies of both models will be obtained to choose which one has the best performance in the event of a large magnitude earthquake. The seismic design of the structure has been carried out according to the recommendations of ASCE/SEI 07-22 “Minimum Design Loads for Buildings and Other Structures”, NTE E.030 Seismic-resistant design, R.M. 355-2018-HOUSING and NTE E.031 Seismic isolation.
Trabajo de Suficiencia Profesional (es_PE)
application/pdf (en_US)
application/epub (en_US)
application/msword (en_US)
spa (es_PE)
Universidad Peruana de Ciencias Aplicadas (UPC) (es_PE)
info:eu-repo/semantics/openAccess (es_PE)
http://creativecommons.org/licenses/by-nc-sa/4.0/ (*)
Universidad Peruana de Ciencias Aplicadas (UPC) (es_PE)
Repositorio Académico - UPC (es_PE)
Aislador
sísmico
Histéresis
rigidez
fluencia
amortiguamiento
desplazamiento
periodo
espectro
acelerograma
modal
derivas y frecuencia1
Insulator
seismic
Hysteresis
rigidity
creep
damping
displacement
period
spectrum
accelerogram
modal
drifts and frequency
Análisis comparativo sismo resistente usando aisladores con núcleo de plomo y deslizadores planos de fricción en una edificación de 3 niveles en el departamento de Apurímac - Provincia de Chincheros (es_PE)
Comparative earthquake-resistant analysis using insulators with lead core and flat friction sliders in a 3-story building in the department of Apurímac - Province of Chincheros
info:eu-repo/semantics/bachelorThesis (es_PE)
Universidad Peruana de Ciencias Aplicadas (UPC). División de Estudios Profesionales para Ejecutivos (EPE) (es_PE)
Ingeniería Civil (es_PE)
Licenciatura (es_PE)
Ingeniero Civil (es_PE)
PE (es_PE)
https://purl.org/pe-repo/ocde/ford#2.01.01
https://purl.org/pe-repo/ocde/ford#2.00.00 (es_PE)
https://purl.org/pe-repo/renati/level#tituloProfesional (es_PE)
40099183
0000-0003-2132-8171 (es_PE)
40982899
40462537
732016 (es_PE)
Serrano Lazo, Malena Alessandra
Anza Moreau, Cesar Augusto
https://purl.org/pe-repo/renati/type#trabajoDeSuficienciaProfesional (es_PE)
Privada societaria



This item is licensed under a Creative Commons License Creative Commons