Buscar en Google Scholar
Título: Influencia del proceso constructivo en la respuesta del análisis estructural en edificaciones de concreto armado
Otros títulos: Influence of the construction process in the response of the structural analysis in reinforced concrete structures
Asesor(es): Moreno Sanchez, Javier Daniel
Fecha de publicación: 20-ene-2020
Institución: Universidad Peruana de Ciencias Aplicadas (UPC)
Resumen: Dada la necesidad de velocidad en las construcciones en las que se trabaja en la actualidad en el rubro de la construcción, siendo más específicas en edificios de concreto armado, se hace cada vez más necesario e importante hacer un estudio en el cual se pueda considerar las cargas que actúan durante el proceso constructivo. Dichas cargas, en ocasiones, pueden llegar exceder la resistencia considerada en el diseño inicial, este efecto se ve incrementado por el hecho que los pisos superiores son soportados por los pisos inferiores recientemente vaciados, los cuales no poseen la resistencia de diseño final. Entonces para poder utilizar dicho análisis incremental o secuencial de cargas generadas por el avance de la construcción va a ser de suma importancia definir el cronograma de trabajo de la obra analizada, para poder obtener el historial de cargas. En el presente trabajo se hará la comparación del análisis convencional y el análisis por proceso constructivo, donde en cada uno de ellos se estudiará las variaciones en los desplazamientos, momentos y fuerzas cortantes de las columnas, vigas y losas de la estructura, generadas al contemplar diversos escenarios donde en cada uno varía la geometría estructural, el número de pisos, tiempos de encofrados de dichos elementos y variación del módulo de elasticidad a lo largo del proceso de maduración del concreto.

Given the need for speed in the constructions currently working in the construction sector, being more specific in buildings of reinforced concrete, it becomes increasingly necessary and important to make a study in which the loads that act during the construction process. These loads can sometimes exceed the resistance considered in the initial design; this effect is increased by the fact that the upper floors are supported by the recently emptied lower floors, which do not have the final design resistance. So in order to be able to use this incremental or sequential analysis of loads generated by the progress of the construction it will be of utmost importance to define the work schedule of the work analyzed, in order to obtain the load history. In the present work the comparison of conventional analysis and analysis by constructive process will be done, where in each one of them the variations in the displacements, moments and shear forces of the columns, beams and slabs of the structure, generated when contemplating different scenarios in which each one varies the structural geometry, the number of floors, time of formwork of said elements and variation of the modulus of elasticity throughout the maturation process of the concrete.
Enlace al repositorio: http://hdl.handle.net/10757/648680
Disciplina académico-profesional: Ingeniería Civil
Institución que otorga el grado o título: Universidad Peruana de Ciencias Aplicadas (UPC). Facultad de ingeniería
Grado o título: Ingeniero Civil
Fecha de registro: 14-feb-2020



Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons