Buscar en Google Scholar
Título: Efecto de tres niveles de PET reciclado como reemplazo de agregado fino en la resistencia a compresión axial del concreto convencional f’c 210 kg/cm2
Asesor(es): Ravines Azañero, Irene del Rosario
Campo OCDE: https://purl.org/pe-repo/ocde/ford#2.01.01
Fecha de publicación: 5-ene-2018
Institución: Universidad Privada del Norte
Resumen: La presente investigación tiene como objetivo determinar la resistencia a compresión axial reemplazando el agregado fino por PET reciclado en 5%, 10% y 15% en un concreto convencional f’c = 210 kg/cm según la NTP 339.034 HORMIGON CONCRETO (2008). Para este estudio se utilizó agregados de la cantera “Bazán”, ubicada salida a Bambamarca a la altura del grifo 3M y cemento Portland tipo I, Se evaluó las propiedades físico-mecánicas de los agregados usados, los cuales presentan los siguientes valores: módulo de finura 2.98, gravedad específica 2.59 gr/cm 2 , absorción 0.911%, peso unitario suelto 1729 kg/m 3 , peso unitario compactado 1832 kg/m y contenido de humedad 6.60% para agregado fino, de la misma manera para el agregado grueso su módulo de finura es 6.99, gravedad específica 2.64 gr/cm 3 3 3 , absorción 1.64%, peso unitario suelto 1460 kg/m , peso unitario compactado 1526 kg/m y contenido de humedad 0.76%, cumplen con las especificaciones en la norma ASTM C33-NTP 400.037. Se realizó el diseño de concreto mediante el método ACI del Comité 211 para un f’c= 210 kg/cm 3 muestra patrón y 3 muestras con diferentes porcentajes de PET reciclado 5%, 10% y 15% reemplazando el agregado fino, evaluados en 3 periodos de curado 7, 14 y 28 días; determinándose que a 7 días de curado la resistencia alcanzada fue de 144.38 kg/cm 2 con 0% de PET reciclado; 138 kg/cm 2 2 al reemplazar 5% de PET; 131.13 kg/cm al reemplazar 10% de PET y 123.39 kg/cm al reemplazar 15% de PET reciclado; a los 14 días de curado la resistencia alcanzada fue de 181.23 kg/cm 2 2 con 0% de PET reciclado; 176.06 kg/cm al reemplazar 5% de PET; 170.64 kg/cm 2 al reemplazar 10% de PET y 164.91 kg/cm al reemplazar 15% de PET reciclado; para un tiempo de 28 días de curado la resistencia alcanzada fue de 211.21 kg/cm 2 con 0% de PET reciclado; 204.72 kg/cm 2 2 al reemplazar 5% de PET; 195.31 kg/cm al reemplazar 10% de PET y 187.20 kg/cm al reemplazar 15% de PET reciclado. Finalmente se concluye que la resistencia a compresión axial respecto al concreto patrón de los ensayos realizados a los 28 días de curado disminuye con la utilización del 5% PET reciclado en un 5.28 kg/cm 2 , con la utilización del 10% PET reciclado, disminuye un 14.69 kg/cm y con la utilización del 15% PET reciclado, disminuye un 22.80 kg/cm 2 2 ; evidenciándose que disminuyen en 3.07%, 7.53% y 11.37% conforme aumenta el porcentaje de PET reciclado en 5, 10 y 15% respectivamente.

The objective of this research is to determine the axial compressive strength that replaces the fine aggregate with recycled PET at 5%, 10% and 15% in conventional f'c = 210 kg/cm according to NTP 339.034 CONCRETE (2008). For this study the aggregates of the quarry "Bazán", Salida a Bambamarca at the height of the tap 3M and Portland cement type I, were used. The physicalmechanical properties of the used aggregates were evaluated. The values are presented: Module fineness 2.98, specific gravity 2.59 gr/cm 3 2 , absorption 0.911%, loose unit weight 1729 kg/m , compacted unit weight 1832 kg/m and moisture content 6.60% for fine aggregate, in the same way for coarse aggregate its fineness modulus is 6.99 , specific gravity 2.64 gr/cm 3 , absorption 1.64%, loose unit weight 1460 kg/m 3 , compacted unit weight 1526 kg/m 3 3 and moisture content 0.76%, complies with the specifications in ASTM C33-NTP 400.037. The concrete design was carried out using the ACI method of Committee 211 for a f'c = 210 kg/cm standard sample and 3 samples with different percentages of PET recycled 5%, 10% and 15% replacing the fine aggregate, evaluated in 3 Curing periods 7, 14 and 28 days; determining that after 7 days of curing the resistance reached was 144.38 kg/cm 2 with 0% recycled PET; 138 kg/cm 2 2 when replacing 5% PET; 131.13 kg/cm when replacing 10% PET and 123.39 kg/cm when replacing 15% recycled PET; after 14 days of curing the resistance reached was 181.23 kg/cm 2 2 with 0% recycled PET; 176.06 kg/cm when replacing 5% PET; 170.64 kg/cm 2 when replacing 10% PET and 164.91 kg/cm 2 2 when replacing 15% recycled PET; for a time of 28 days of curing the resistance reached was 211.21 kg/cm with 0% recycled PET; 204.72 kg/cm 2 when replacing 5% PET; 195.31 kg/cm when replacing 10% PET and 187.20 kg/cm 2 2 when replacing 15% recycled PET. Finally, it is concluded that the resistance to axial compression with respect to concrete, standard of the tests carried out, after 28 days of curing, decreases with the use of 5%, recycled PET at 5.28 kg/cm , with the use of 10%, recycled PET, decreases by 14.69 kg/cm 2 2 and with the use of 15% of recycled PET, with a decrease of 22.80 kg/cm ; evidencing that they decrease by 3.07%, 7.53% and 11.37% as the percentage of recycled PET increases by 5, 10 and 15% respectively.
Enlace al repositorio: https://hdl.handle.net/11537/12667
Disciplina académico-profesional: Ingeniería Civil
Institución que otorga el grado o título: Universidad Privada del Norte. Facultad de Ingeniería
Grado o título: Ingeniero Civil
Jurado: Aguilar Aliaga, Orlando; Quispe Rodríguez, Gerson; Alva Sarmiento, Anita Elizabet
Fecha de registro: 26-ene-2018



Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons