Buscar en Google Scholar
Título: Influencia de los porcentajes de aditivos superplastificantes en la consistencia de concretos fluidos en Lima 2021
Asesor(es): Vasquez Díaz, Alberto Rubén
Campo OCDE: https://purl.org/pe-repo/ocde/ford#2.01.01
Fecha de publicación: 7-jun-2021
Institución: Universidad Privada del Norte
Resumen: La presente investigación se realizó en Lima, en las instalaciones de la empresa Master Builders Solutions Peru S.A (MBS), donde se determinó la influencia de los porcentajes de aditivos superplastificantes en la consistencia de los concretos fluidos, el instrumento utilizado fue la guía de observación, guía de ensayos para analizar los datos se empleó la inferencia estadística al cruzar los datos de los resultados, el problema planteado corresponde en la pérdida rápida de consistencia del concreto fluido y no contar con una dosis ideal para estos tipos de concretos basada en la naturaleza de aditivos químicos superplastificante que nos permitan modificar aspectos en el concreto fresco y endurecido logrando características superiores al concreto convencional (sin aditivo), de acuerdo a los estudios se presentan valores de consistencias de 8 ½ a 10 ½ pulgadas cuando se incrementa el % de aditivo de 1.0 a 2.5% con reducción de agua de 8% a 22.5%, se mejora la resistencia a compresión de f´c = 270 kg/cm2 sin aditivo a f´c = 643 kg/cm2 en el aditivo LBTPA-003-19 y f´c = 608 kg/cm2 para el aditivo LBTPA-002-19 a 28 días, con relaciones a/c de 0.56 a 0.45, lo cual hace que el concreto evaluado se pueda tener resistencias iniciales al 100% en 61 y 64 horas. Se logra encontrar la influencia del porcentaje de aditivos superplastificantes en la consistencia de los concretos fluidos teniendo una mejora en su uso de obtener consistencias fluidas sin necesidad de incrementar agua a la mezcla, la dosis optima del aditivo LBTPA-003-19 es de 1.5% del peso del cemento y del aditivo LBTPA-002-19 es de 2.0% de acuerdo con el diseño propuesto.

The present investigation was carried out in Lima, at the facilities of the company Master Builders Solutions Peru SA (MBS), where the influence of the percentages of superplasticizer additives on the consistency of the concrete fluids was determined, the instrument used was the observation guide , test guide to analyze the data, statistical inference was used when crossing the data of the results, the problem posed corresponds to the rapid loss of consistency of the flowable concrete and not having an ideal dose for these types of concretes based on nature of superplasticizer chemical additives that allow us to modify aspects in fresh and hardened concrete achieving superior characteristics to conventional concrete (without additive), according to the studies, consistency values of 8 ½ to 10 ½ inches are presented when the% of additive is increased from 1.0 to 2.5% with water reduction from 8% to 22.5%, the compressive strength of f´c = 270 kg / cm2 without additive af´c = 643 kg / cm2 in the additive LBTPA-003-19 and f´c = 608 kg / cm2 for the additive LBTPA-002-19 at 28 days, with relationships a / c from 0.56 to 0.45, which means that the evaluated concrete can have initial strengths at 100% in 61 and 64 hours. It is possible to find the influence of the percentage of superplasticizer additives in the consistency of fluid concrete, having an improvement in its use to obtain fluid consistencies without the need to increase water to the mix, the optimal dose of the additive LBTPA-003-19 is 1.5% of the weight of the cement and the additive LBTPA-002-19 is 2.0% according to the proposed design.
Enlace al repositorio: https://hdl.handle.net/11537/27703
Disciplina académico-profesional: Ingeniería Civil
Institución que otorga el grado o título: Universidad Privada del Norte. Facultad de Ingeniería
Grado o título: Ingeniero Civil
Jurado: Vildoso Flores, Alejandro; Vega Rivera, Gerson Elías; Mosqueira Ramirez, Hermes Roberto
Fecha de registro: 2-sep-2021



Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons