Look-up in Google Scholar
Title: Efecto del carburo de calcio (cac2), silicato de sodio y temperatura de lixiviación alcalina sobre la extracción de as(%) de un concentrado de cobre con enargita (cu3ass4)
Advisor(s): Vega González, Juan
Issue Date: Apr-2019
Institution: Universidad Nacional de Trujillo
Abstract: El presente trabajo de investigación trató sobre el efecto del carburo de calcio (CaC2), silicato de sodio (Na2SiO3) y temperatura de lixiviación alcalina utilizando soda cáustica (NaOH) y sulfuro de sodio (Na2S), sobre la extracción de As(%) de un concentrado de cobre con enargita (Cu3AsS4). El análisis químico del concentrado fue: 21,94%Cu, 13,18% Fe, 7,06%As, 2,63%Zn, 0.70%Pb. Las pruebas se realizaron considerando 3 niveles para las variables de carburo de calcio y temperatura y dos niveles para silicato de sodio, con dos repeticiones con un total de 36 pruebas, siendo las variable carburo de calcio (CaC2) 4, 8 y 12 Kg/TM dosificada durante la remolienda del concentrado, temperatura de 30, 60 y 90°C, silicato de sodio con 0 y 10 Kg/TM, las condiciones de las pruebas fueron: dilución (L/S) 10/1, velocidad de agitación de 750 rpm, granulometría 90% -mallas 400, sulfuro de sodio (Na2S) 1.0 M, soda cáustica (NaOH) a 3.5 M, y tiempo de agitación de 6 horas; las colas se analizó por el %As. De los resultados se obtuvo que al usar 8 Kg/TM de CaC2 como preoxidante en la remolienda, a 60°C y 90°C, se obtiene 88,10% y 89,24% respectivamente de extracción de arsénico. Obteniendo la máxima extracción de arsénico de 91,57%, con 12 Kg/TM de CaC2, 90°C y 10 Kg/TM de Na2SiO3. Se concluye según el análisis de varianza con un nivel de confianza de 95% que las variables de carburo de calcio, temperatura y silicato de sodio, asi como sus interacciones dobles influyen significativamente en la extracción de arsénico, en cambio la interacción triple no influye significativamente.
Note: The present research work deals with the effect of calcium carbide (CaC2), sodium silicate (Na2SiO3) and alkaline leaching temperature using caustic soda (NaOH) and sodium sulfide (Na2S), on the extraction of As (%) from a concentrate of copper with enargite (Cu3AsS4). The chemical analysis of the concentrate was: 21.94% Cu, 13.18% Fe, 7.06% As, 2.63% Zn, 0.70% Pb. The tests were carried out considering 3 levels for the variables of calcium carbide and temperature and two levels for sodium silicate, with two repetitions with a total of 36 tests, being the variable calcium carbide (CaC2) 4, 8 and 12 Kg/TM dosed during the regrind of the concentrate, temperature of 30, 60 and 90 °C, sodium silicate with 0 and 10 Kg/TM, the conditions of the tests were: dilution (L/S) 10/1, speed of agitation of 750 rpm, granulometry 90% -mesh 400, sodium sulfide (Na2S) 1.0 M, caustic soda (NaOH) at 3.5 M, and agitation time of 6 hours; The tails were analyzed by% As. From the results it is obtained that by using 8Kg/TM of CaC2 as a pre-oxidizer in the trawl, at 60 °C and 90 °C, 88,10% and 89.24% respectively of arsenic extraction are obtained. Obtaining the maximum extraction of arsenic of 91,57%, with 12 Kg/TM of CaC2, 90 ° C and 10 Kg/TM of Na2SiO3. It is concluded according to the analysis of variance with a confidence level of 95% that the variables of calcium carbide, temperature and sodium silicate, as well as their double interactions significantly influence the extraction of arsenic, however the triple interaction does not significantly influence.
Discipline: Ingeniería
Grade or title grantor: Universidad Nacional de Trujillo. Facultad de Ingeniería
Grade or title: Ingeniero Metalúrgico
Register date: 12-Apr-2019



This item is licensed under a Creative Commons License Creative Commons