Buscar en Google Scholar
Título: Efecto de la composición del gas de protección en el proceso gmaw sobre los parámetros geométricos en la soldadura de un acero inoxidable austenítico
Asesor(es): Vera Alvarado, Jorge Wilfredo
Fecha de publicación: jun-2019
Institución: Universidad Nacional de Trujillo
Resumen: En el presente trabajo de investigación se ha estudiado el efecto de la composición del gas de protección en el proceso de soldadura por arco utilizando gas de protección, GMAW sobre los parámetros geométricos en la soldadura de un acero inoxidable austenitico AISI 304. Se ha evaluado composiciones, desde 100% CO2, 20% CO2 – 80% Ar y 98% Ar – 2% CO2. como gas de protección, en el proceso de soldadura GMAW, con 4 repeticiones por corrida experimental, haciendo un total de doce probetas de ensayo, los demás parámetros del procedimiento de soldadura se han mantenido constantes. Los resultados estadísticos muestran que hay un efecto significativo de la composición del gas de protección en los paramentos geométricos del cordón de soldadura como son el ancho del cordón y área de refuerzo, mas no en la dilución en la soldadura del acero AISI 304. Se concluye que la mejor forma del cordón caracterizada por bajo refuerzo y mayor ancho de cordón (asociado con bajos ángulos de mojado y altos de fusión) junto con alta penetración y dilución, fue obtenida con la mezcla 98%-2% CO2, en la soldadura por arco GMAW para aceros inoxidable AISI 304.
Nota: In the present work of investigation has studied the effect of the composition of the gas of protection in the process of welding by arc using gas of protection, GMAW on the geometric parameters in the welding of a stainless steel austenitico AISI 304. Compositions have been evaluated, from 100% CO2, 20% CO2 - 80% Ar and 98% Ar - 2% CO2. as protection gas, in the GMAW welding process, with 4 repetitions per experimental run, making a total of twelve test specimens, the other parameters of the welding process have remained constant. The statistical results show that there is a significant effect of the composition of the protective gas on the geometric faces of the weld bead, such as the cord width and reinforcement area, but not in the dilution. in the welding of AISI 304 steel. It is concluded that the best cord shape characterized by low reinforcement and greater cord width (associated with low wetting angles and high melting angles) together with high penetration and dilution, was obtained with the mixture 98% -2% CO2, in the GMAW arc welding for stainless steels AISI 304.
Disciplina académico-profesional: Ingeniería
Institución que otorga el grado o título: Universidad Nacional de Trujillo. Facultad de Ingeniería
Grado o título: Ingeniero Metalúrgico
Fecha de registro: 10-jun-2019



Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons