Look-up in Google Scholar
Title: Efecto de la temperatura de recocido sobre la resistencia al impacto y dureza de una fundición nodular astm a536 en la obtención de una fundición nodular ferrítica
Advisor(s): Purizaga Fernández, Ismael Trujillo
Issue Date: Sep-2018
Institution: Universidad Nacional de Trujillo
Abstract: En la presente investigación se estudió el efecto de la temperatura de recocido en una fundición nodular ASTM A536 sobre la dureza, resistencia al impacto y microestructura en la obtención de una fundición nodular ferrítica. Para tal propósito se utilizó barras cuadradas de 15 mm x 15 mm x 200 mm de longitud suministrados por Fundición Laminar SAC – Lima, de donde se maquinaron las probetas para el ensayo de dureza según la norma ASTM E-140 y para el ensayo de impacto según norma ASTM E23-98, los cuales fueron recocidos a las temperaturas de 800, 850, 900, 950 y 1000°C por un tiempo de 25 horas con enfriamiento lento dentro del horno. Los resultados muestran que al incrementar la temperatura de recocido la dureza disminuye desde 198.40 HB para suministro (25°C) hasta 114.80 HB para 1000°C de temperatura de recocido, y la resistencia al impacto (J) aumenta según se incrementa la temperatura de recocido desde 53.90 J para suministro (25°C) hasta 124.20 J para 1000°C. Esto debido a la descomposición de la austenita en ferrita que va aumentando según se incrementa la temperatura de recocido, siendo la transformación completa o total de la austenita en ferrita en las condiciones de estudio desde 900°C, a partir de la cual se obtuvo una fundición nodular ferrítica y que los nódulos de grafito (Gn) son estables a cualquier temperatura de recocido en estudio. Se concluye que la temperatura de recocido afecta significativamente la dureza, resistencia al impacto y microestructura, y que la temperatura mínima para la obtención de una fundición nodular ferrítica en las condiciones de estudio es 900°C. Los resultados obtenidos han sido contrastados con un análisis estadístico con un nivel de confianza del 95%.
Note: In the present investigation, the effect of the annealing temperature in a nodular cast iron ASTM A536 on the hardness, impact resistance and microstructure in obtaining a ferritic nodular cast iron was studied. For this purpose we used square bars of 15 mm x 15 mm x 200 mm in length supplied by Fundición Laminar SAC - Lima, where the specimens were machined for the hardness test according to the ASTM E- 140 standard and for the impact test according to ASTM E23-98, which were annealed at temperatures of 800, 850, 900, 950 and 1000 ° C for a time of 25 hours with slow cooling inside the oven. The results show that when the annealing temperature is increased, the hardness decreases from 198.40 HB for supply (25°C) to 114.80 HB for 1000°C annealing temperature, and the impact resistance (J) increases as the temperature increases. annealed from 53.90 J for supply (25°C) up to 124.20 J for 1000°C. This is due to the decomposition of austenite in ferrite that increases as the annealing temperature increases, being the total or total transformation of austenite in ferrite under the study conditions from 900°C, from which a ferritic nodular cast iron and that the graphite nodules (Gn) are stable at any annealing temperature under study. It is concluded that the annealing temperature significantly affects the hardness, impact resistance and microstructure, and that the minimum temperature for obtaining a ferritic nodular cast iron in the study conditions is 900°C. The results obtained have been contrasted with a statistical analysis with a confidence level of 95%.
Discipline: Ingeniería
Grade or title grantor: Universidad Nacional de Trujillo.Facultad de Ingeniería
Grade or title: Ingeniero Metalúrgico
Register date: 28-Dec-2018



This item is licensed under a Creative Commons License Creative Commons