Look-up in Google Scholar
Title: Optimización del ancho del cordón de soldadura en acero A36 en el proceso de soldadura FCAW, usando metodología Taguchi
Advisor(s): Rubio Jacobo, Luis Alberto
Issue Date: 2013
Institution: Universidad Nacional de Trujillo
Abstract: El objetivo de la presente investigación fue determinar los niveles óptimos de corriente de_x000D_ soldadura, voltaje del arco y velocidad de soldadura que simultáneamente maximizan el ancho del cordón de soldadura y la relación S/R (Señal-Ruido), en acero A36 en el proceso de soldadura FCAW. Se utilizó el diseño de parámetros de la metodología Taguchi donde se seleccionó un arreglo ortogonal L9 haciendo un total de 9 corridas experimentales. Usando las relaciones S/R propuestas por Taguchi, se encontró que 300 A de la variable corriente de soldadura y 1000 mm/min para la velocidad de soldadura es la combinación que maximiza el ancho del cordón de soldadura
Note: The purpose of this investigation was to determine the optimal levels of welding current, arc voltage and welding speed simultaneously maximize the width of the weld bead and the S / N (Signal to Noise) ratio in A36 steel in the process FCAW. Design parameters of the Taguchi methodology where L9 orthogonal array selected by a total of 9 experimental runs were used. Using the S / R ratios proposed by Taguchi, it was found that 300 A current variable welding and 1000 mm / min for the welding speed is a combination which maximizes the width of the weld bead
Discipline: Estadística
Grade or title grantor: Universidad Nacional de Trujillo.Facultad de Ciencias Físicas y Matemáticas
Grade or title: Ingeniero Estadístico
Register date:  12



This item is licensed under a Creative Commons License Creative Commons