Buscar en Google Scholar
Título: Efecto del vidrio molido en las propiedades físicas y mecánicas del concreto, Trujillo 2019
Asesor(es): Durand Bazan, Enrique Manuel
Campo OCDE: https://purl.org/pe-repo/ocde/ford#2.01.01
Fecha de publicación: 2020
Institución: Universidad Privada de Trujillo
Resumen: La presente investigación titulada “EFECTO DEL VIDRIO MOLIDO EN LAS PROPIEADES FISCAS Y MECANICAS DEL CONCRETO, TRUJILLO 2019”, tiene por objetivo evaluar las propiedades físicas y mecánicas del concreto en estado fresco y en estado endurecido, tales como: trabajabilidad, peso unitario, contenido de aire, resistencia a compresión y flexión. Para el desarrollo de esta investigación se utilizó vidrio molido reciclado (vidrio común proveniente de botellas recicladas de distintos colores), este componente se reemplazará por agregado fino en diferentes porcentajes de 0%,1%, 3% y 5% respectivamente. Se realizaron los ensayos de granulometría para los agregados, contenido de humedad, peso unitario suelto y compactado, peso específico y absorción. Para realizar esta investigación se realizó cuatro diseños (01 diseño patrón y 3 diseños con adición de vidrio) de cada diseño se realizarán 09 probetas cilíndricas de 10 cm de diámetro por 20 cm de altura, las cuales se realizó el ensayo a compresión a 7, 14 y 28 días. También se realizaron moldes rectangulares de 6” X 6” X 21”, para ensayos de resistencia a flexión en vigas, 02 moldes para cada diseño, las cuales se romperán a los 28 días de edad. En total se ensayaron 03 moldes cilíndricos y 2 moldes rectangulares para cada diseño, obteniendo un total de 36 probetas cilíndricas y 08 especímenes de vigas. Los resultados muestran que el concreto con adición de vidrio molido con un 5% de reemplazo de agregado fino logró aumentar la resistencia a la compresión del concreto con un porcentaje de 114% respecto al diseño patrón que llego hasta 102%, siendo esta característica la más sobresaliente. En cuanto a su resistencia a flexión en vigas ninguno de los diseños tiene variaciones significativas, el diseño con 3% tiene una resistencia a flexión de 45.61 kg/cm2 siendo este el mayor valor obtenido con respecto a los otros diseños. Con estos resultados se puede afirmar que el reemplazo parcial del agregado fino por vidrio molido es favorable para el concreto, validando así la hipótesis propuesta.

This research entitled "EFFECT OF THE GRINDED GLASS IN THE FISCAL AND MECHANICAL PROPERTIES OF THE CONCRETE, TRUJILLO 2019", aims to evaluate the physical and mechanical properties of concrete in the fresh and hardened state, such as: workability, unit weight, content of air, resistance to compression and flexion. For the development of this research, recycled ground glass (common glass from recycled bottles of different colors) was used, this component will be replaced by fine aggregate in different percentages of 0%, 1%, 3% and 5% respectively. Granulometry tests were performed for aggregates, moisture content, loose and compacted unit weight, specific weight and absorption. In order to carry out this research, four designs (01 standard design and 3 designs with glass addition) were carried out for each design, 09 cylindrical specimens of 10 cm in diameter and 20 cm in height will be made, which were carried out with the compression test at 7, 14 and 28 days. Rectangular molds of 6 ”X 6” X 21 ”were also made, for bending strength tests on beams, 02 molds for each design, which will break at 28 days of age. In total, 03 cylindrical molds and 2 rectangular molds were tested for each design, obtaining a total of 36 cylindrical specimens and 08 specimens of beams. The results show that the concrete with the addition of ground glass with a 5% replacement of fine aggregate managed to increase the compressive strength of the concrete with a percentage of 114% compared to the standard design that reached up to 102%, this characteristic being the most outstanding. As for its bending strength in beams, none of the designs has significant variations, the 3% design has a flexural strength of 45.61 kg / cm2, this being the highest value obtained with respect to the other designs. With these results it can be affirmed that the partial replacement of the fine aggregate with ground glass is favorable for the concrete, thus validating the proposed hypothesis.
Disciplina académico-profesional: Ingeniería Civil
Institución que otorga el grado o título: Universidad Privada de Trujillo. Facultad de Ingeniería
Grado o título: Ingeniero Civil
Fecha de registro: 9-jun-2020

Ficheros en este ítem:
Fichero Tamaño Formato  
TESIS RODRIGUEZ NUÑEZ y RODRIGUEZ RODRIGUEZ.pdf
  Acceso restringido
13.14 MBAdobe PDFVisualizar/Abrir  Solicita una copia


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons