Buscar en Google Scholar
Título: Influencia de la adición de residuos de construcción en la resistencia a la flexión de losas aligeradas, Trujillo - 2019
Asesor(es): Villar Quiroz, Josualdo Carlos
Palabras clave: FLEXIÓNADICIÓN
Campo OCDE: https://purl.org/pe-repo/ocde/ford#2.01.01
Fecha de publicación: 2020
Institución: Universidad Privada de Trujillo
Resumen: La presente investigación se desarrolló en la ciudad de Trujillo-Perú, se analizó la influencia de adicionar residuos de construcción en la resistencia a la flexión de losas. Para ello se recolectaron residuos de alambre provenientes del encofrado de elementos estructurales, de la construcción del edificio San Gabriel ubicado en la urb. Las Hortensias de California – Trujillo. El propósito del estudio es aprovechar los residuos generados durante el encofrado de zapatas, columnas, placas, vigas, y otros en la construcción convencional para mejorar la resistencia y comportamiento mecánico de las losas aligeradas. Se evaluaron diferentes especímenes que simularon una losa aligerada con presencia de elementos lineales (tuberías), para luego estudiar su resistencia a la flexión tras adicionar diferentes porcentajes en peso de alambre N°08, con el fundamento de incorporar residuos de construcción con propiedades elásticas que funcionen como refuerzo mecánico de las losas aligeradas. La investigación es de tipo experimental, y tuvo una población estadística de 51 probetas; para evaluar la propiedad mecánica de resistencia a la flexión y confinamiento mediante el coeficiente de Poisson en el concreto de losas reforzadas con fibras de alambre. En cuanto a los resultados se observó que el asentamiento del concreto disminuyó levemente cuando se aumentó el contenido de fibras, además del ensayo a flexión de vigas demostraron que la resistencia al agrietamiento o módulo de ruptura, aumenta al incrementar el contenido de fibra. Los resultados demostraron que el módulo de elasticidad disminuye cuando incrementa la dosificación de fibras debido a que existe mayor absorción de energía. Se concluye que la resistencia y la tenacidad aumentan levemente con el contenido de fibras de acero, alcanzando los mejores resultados cuando la dosificación es de 15 kg/m3 de fibra de acero.

The present investigation was developed in the city of Trujillo-Peru, the influence of adding construction waste on the resistance to bending of lightened slabs. For this, wire waste was collected from the structural elements formwork, from the construction of the San Gabriel building located in the urb. The Hortencias of California - Trujillo. The purpose of the study is to take advantage of the waste generated during the formwork of footings, columns, plates, beams, and another in conventional construction to improve the strength and mechanical behavior of the lightened slabs. Different specimens that simulated a light slab with the presence of linear elements (pipes) were evaluated, to later study its resistance to bending after adding different percentages by weight of wire No. 08, with the purpose of incorporating construction residues with elastic properties that work as mechanical reinforcement of the lightened slabs. The research is of experimental type, and had a statistical population of 51 specimens; to evaluate the mechanical property of resistance to bending and confinement by means of the Poisson's coefficient in the concrete of reinforced slabs with wire fibers. Regarding the results, it was observed that the settlement of the concrete decreased slightly when the fiber content was increased, in addition to the bending test of beams showed that the cracking resistance or modulus of rupture increases with increasing fiber content. The results showed that the modulus of elasticity decreases when it increases the dosage of fibers because there is greater absorption of energy. It is concluded that the strength and tenacity increase slightly with the content of steel fibers, reaching the best results when the dosage is 15 kg / m3 of steel fiber. Keywords: - Construction waste. Flexural strength. Lightened slabs
Disciplina académico-profesional: Ingeniería Civil
Institución que otorga el grado o título: Universidad Privada de Trujillo. Facultad de Ingeniería
Grado o título: Ingeniero Civil
Fecha de registro: 9-jun-2020

Ficheros en este ítem:
Fichero Tamaño Formato  
TESIS ABELINO JAVIER HUAMÁN PINTO.pdf
  Acceso restringido
2 MBAdobe PDFVisualizar/Abrir  Solicita una copia


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons