Buscar en Google Scholar
Título: Resistencia a la compresión del concreto F C =210 KG/cm" elaborado con cemento antisalitre MS y aditivo retardante de fragua plastiment TM - 12
Asesor(es): Ramal Montejo, Rodolfo
Palabras clave: CompresiónCemento
Campo OCDE: http://purl.org/pe-repo/ocde/ford#2.01.00
Fecha de publicación: 2023
Institución: Universidad Privada Antenor Orrego - UPAO
Resumen: En el presente informe de tesis se tiene como objetivos poder determinar el efecto de los aditivos retardantes plastificantes TM-12 en su resistencia frente a la comprensión del concreto mostrado en diferentes muestras de edades del concreto f´c = 210kg/cm2. Para ello, se tuvo una investigación descriptiva, correlacional y cuantitativa. Se consideraron 02 tipos de concreto: Concreto Patrón y Concreto experimental, para el último se tomó en cuenta dos dosificaciones con el mínimo y el máximo porcentaje de aditivo. Además, el número de muestras será de 4, para cada tipo de concreto (concentración), a las edades de 7 días, 14 días y 28 días, haciendo un total de 40 probetas. Con todo ello, se tuvo que: la Resistencia a la compresión de concreto óptimo y máximo que se puede obtener (457.9253), para valores óptimos y altos de cada una de las variables independientes como son: concentración de aditivo (Elemento vaciado = 0.0090) y el tiempo de fraguado de concreto (Edad del testigo = 28.0). Por ello, se concluyó con el cumplimiento de objetivos general y específicos

The objectives of this thesis was to determines the effect of the plasticizing retarding additives TM – 12 on the compressives strengths of concrete at differents ages of the concretes f'c = 210kg/cm2. For this, a descriptive, correlational and quantitative investigation was carried out. 02 types of concretes weres consideres: Standard Concretes and Experimental Concrete, for the latter two dosages were taken into account with the minimum and maximum percentage of additive. In additions, the number of samples will be 4, for each type of concrete (concentration), at the ages of 7 days, 14 days and 28 days, making a total of 40 specimens. With all this, it was necessary: the optimum and maximum concrete compressive strength that can be obtained (457.9253), for optimal and high values of each of the independent variables such as: additive concentration (Empty element = 0.0090) and the setting time of concrete (Age of the witness = 28.0). Therefore, it was concluded with the fulfillment of general and specific objectives
Disciplina académico-profesional: Ingeniería Civil
Institución que otorga el grado o título: Universidad Privada Antenor Orrego. Facultad de Ingeniería
Grado o título: Ingeniero Civil
Jurado: Rodriguez Ramos, Mamerto; Vega Benites, Jorge; Salazar Perales, Álvaro
Fecha de registro: 9-ene-2023; 9-ene-2023



Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons