Buscar en Google Scholar
Título: Propuesta de diseño de soportería sismo resistente para instalaciones en una edificación
Otros títulos: Proposal for the design of earthquake-resistant supports for installations in a building
Asesor(es): Ramírez Guanilo, César Augusto
Campo OCDE: https://purl.org/pe-repo/ocde/ford#2.01.01; https://purl.org/pe-repo/ocde/ford#2.00.00
Fecha de publicación: 13-nov-2023
Institución: Universidad Peruana de Ciencias Aplicadas (UPC)
Resumen: En el Perú existe un capítulo de diseño de elementos no estructurales. Sin embargo, dicha norma es muy general por ejemplo no hay norma específica que regule el diseño de soporterias para instalaciones que podría aportar en la seguridad de las personas, así como también en la continuidad de los servicios ante un sismo. El presente proyecto de investigación tiene como objetivo proponer un diseño de soportería sismo resistente para instalaciones en una edificación. La investigación se basó en diseñar dos opciones de soporterías, la opción 1, es de estructura metálica canal tipo U 2” x 1” tanto horizontal como vertical y la opción 2, es de riel unistrut 42mm x 20mm en la parte horizontal y varilla roscada de 3/8” en los verticales con refuerzo en diagonal de ambos laterales por varillas roscadas de 3/8”. El diseño de la soportería se realizó con ayuda del software AutoCAD, donde se plasmó la idea inicial y posteriormente se realizó los cálculos en Excel en concordancia al capítulo 6, de la NTP. E.030 Diseño Sismorresistente, la simulación computacional fue realizada con SAP2000. Partiendo de los resultados obtenidos, se llegó a las siguientes conclusiones generales: Las dos propuestas de diseño tienen menor desplazamiento con respecto al diseño existente, lo cual indica que la propuesta es exitosa.

In Peru there is a chapter on the design of non-structural elements. However, this standard is very general, for example, there is no specific standard that regulates the design of supports for facilities that could contribute to the safety of people, as well as the continuity of services in the event of an earthquake. The objective of this research project is to propose an earthquake-resistant support design for installations in a building. The research was based on designing two options for supports, option 1, is a 2” x 1” U-type channel metal structure, both horizontal and vertical, and option 2, is a 42mm x 20mm unistrut rail in the horizontal part and threaded rod. 3/8” in the verticals with diagonal reinforcement on both sides with 3/8” threaded rods. The design of the support was carried out with the help of AutoCAD software, where the initial idea was captured and subsequently the calculations were carried out in Excel in accordance with chapter 6 of the NTP. E.030 Earthquake Resistant Design, the computer simulation was carried out with SAP2000. Based on the results obtained, the following general conclusions were reached: The two design proposals have less displacement with respect to the existing design, which indicates that the proposal is successful.
Enlace al repositorio: http://hdl.handle.net/10757/670937
Disciplina académico-profesional: Ingeniería Civil
Institución que otorga el grado o título: Universidad Peruana de Ciencias Aplicadas (UPC). División de Estudios Profesionales para Ejecutivos (EPE)
Grado o título: Ingeniero Civil
Jurado: Serrano Lazo, Malena Alessandra; Paz Fuentes, Israel Andersson
Fecha de registro: 11-ene-2024



Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons