Look-up in Google Scholar
Title: Propuesta de diseño de muro de suelo reforzado con geomallas para estabilización de talud en el AA. HH. Buenos Aires de Villa en el distrito de Chorrillos
Advisor(s): Cárdenas Guillen, Jorge Luis
OCDE field: https://purl.org/pe-repo/ocde/ford#2.01.01; https://purl.org/pe-repo/ocde/ford#2.00.00
Issue Date: 13-Nov-2023
Institution: Universidad Peruana de Ciencias Aplicadas (UPC)
Abstract: El problema de deslizamiento de taludes trae consigo importantes consecuencias tales como falta de acceso de personas y/o vehículos al área afectada, pérdidas materiales e incluso hasta humanas. Frente a ello existen diversos métodos que buscan reforzar el talud y generar estabilidad. La presente investigación propone el diseño de 3 muros de suelo reforzado (MSR) como medida para mejorar la estabilidad del talud ubicado en el AA. HH. Buenos Aire de Villa, en el distrito de Chorrillos. Para el desarrollo del diseño se usó la metodología de “Diseño por Factores de Carga y Resistencia” (LRFD) en la cual está basada la guía FWHA-NHI-10-024. Esta consiste en la mayoración de las cargas de diseño y reducción de las cargas que favorecen a la resistencia de la estructura. Al iniciar el diseño se definen las características del suelo que será reforzado con las geomallas, el material de relleno y la geomalla a usar, que en este caso fue la Miragrid 10XT. Asimismo, se realizó el proceso de predimensionamiento proponiendo una altura y ancho del muro, los cuales serán verificados por medio del análisis externo, interno y de estabilidad global. Para el cálculo del asentamiento y el análisis de la estabilidad global, tanto en condiciones estáticas como pseudoestáticas, se utilizó el software GEO 5. Este último análisis indicó que pese a notarse una mejora en el factor de seguridad ante deslizamientos, es decir, un aumento en el valor del F.S, no es suficiente para asegurar que la hipótesis planteada en un inicio es verdadera.

The problem of slope slides brings with it important consequences such as lack of access of people and/or vehicles to the affected area, material losses and even human losses. There are several methods that seek to reinforce the slope and generate stability. The present investigation proposes the design of 3 reinforced soil walls (RSM) as a measure to improve the stability of the slope located in the AA.HH Buenos Aire de Villa, in the district of Chorrillos. For the development of the design, the "Load and Resistance Factor Design" (LRFD) methodology was used, which is based on the FWHA-NHI-10-024 guide. This consists of increasing the design loads and reducing the loads that favor the resistance of the structure. At the beginning of the design, the characteristics of the soil to be reinforced with the geogrids, the backfill material and the geogrid to be used, which in this case was Miragrid 10XT, were defined. Likewise, the pre-dimensioning process was carried out by proposing a height and width of the wall, which will be verified by means of external and internal analysis and global stability. For the settlement calculation and global stability analysis, both in static and pseudo-static conditions, GEO 5 software was used. The latter analysis indicated that although an improvement in the safety factor against landslides was noted, i.e., an increase in the F.S. value, it is not sufficient to ensure that the hypothesis proposed at the beginning is true.
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Peruana de Ciencias Aplicadas (UPC). Facultad de Ingeniería
Grade or title: Ingeniero Civil
Juror: Duran Ramirez, Gary Gary; Herrera Lopez, Rossana
Register date: 25-Dec-2023



This item is licensed under a Creative Commons License Creative Commons