Look-up in Google Scholar
Title: Diseño del sistema de control de transitorios hidráulicos generados por corte del suministro eléctrico, ante el colapso del sistema de bombeo Nº 11 en la unidad minera Ticlio – Volcán
Advisor(s): Toledo Paredes, Manuel Sebes
OCDE field: http://purl.org/pe-repo/ocde/ford#2.03.02
Issue Date: 2020
Institution: Universidad Nacional de Ingeniería
Abstract: En la presente tesis se ha elaborado el diseño para controlar el comportamiento de los transitorios hidráulicos originados por corte del suministro eléctrico, empleando válvulas y tanques de vejiga para evitar el colapso del sistema de bombeo N°1 de la unidad minera Ticlio - Volcán. para ello se ha hecho un análisis técnico del sistema de bombeo N°11, el cual se ha dividido en tres estudios de caso, incorporando en cada caso diferentes elementos de protección como : "Válvulas anticipadoras de onda", Válvulas anticipadoras de onda, "Válvulas de aire" y "Tanques de vejiga". Para el análisis técnico, se ha empleado como herramienta de cálculo al software Hammer V8i, que representa gráficamente el comportamiento de los transitorios hidráulicos, haciendo el análisis del sistema de bombeo N° 11 sin elementos de protección. Seguidamente se realiza un análisis comparativo de los tres estudios de caso desde el punto de vista económico, con la finalidad de evaluar también la parte económica en la decisión de optar por una u otra alternativa.

In this thesis has been elaborated the design to control the behavior of the Hydraulic Transients caused by power supply cut, using valves and bladder tanks to avoid the collapse of pumping system N°11 of the mining unit Ticlio – Volcan. For this it has been done a technical analysis of pumping system N°11, which has been divided in three case studies incorporating in each case different protection elements as: “Surge anticipating valves”, “Air valves” and “Bladder Tanks”. Fort the technical analysis, it has been used as a calculation tool the software Hammer V8i, wich graphically represents the behavior of the hydraulic transients, doing the analysis of pumping system N°11 without protection elements and with protection elements. Then a comparative analysis is performed of the three case studies since the economical point of view, with the purpose of evaluate also the economic part in the decision to opt for one or another alternative. Finally using one or another element of protection of the three case studies analyzed control is achieved the behavior of the hydraulic transients, that is, both the overpressure and depression waves are damped thus avoiding the possible collapse of pumpingsystem N°11.
Discipline: Ingeniería Mecánica-Eléctrica
Grade or title grantor: Universidad Nacional de Ingeniería. Facultad de Ingeniería Mecánica
Grade or title: Ingeniero Mecánico Electricista
Juror: Salazar Bobadilla, Alejandro; Chávez Lizama, Federico Francisco
Register date: 28-Sep-2021; 28-Sep-2021



This item is licensed under a Creative Commons License Creative Commons