Buscar en Google Scholar
Título: Analizar la resistencia a compresión y tracción del concreto f´c=210 kg/cm2, incorporando 3% y 5% de vidrio triturado, 1% y 2% de cáscara de huevo molido en la edificacion “Maraví Pérez” ubicada en el distrito de San Juan de Lurigancho en el año 2021
Asesor(es): Carrasco Canales, Robert Manuel
Campo OCDE: https://purl.org/pe-repo/ocde/ford#2.01.01
Fecha de publicación: 5-dic-2021
Institución: Universidad Privada del Norte
Resumen: La presente investigación se enfoca en el estudio comparativo de la resistencia del concreto a compresión y tracción en probetas cilíndricas, diseñadas a resistencia de f´c = 210kg/cm2, sustituyendo 3% y 5% del agregado grueso por vidrio triturado además de sustituir 1% y 2% de cemento por cascara de huevo molido, las cuales fueron testeadas en laboratorio siguiendo las normas peruanas. Se realizaron 5 tipos de diseño de mezcla, de las cuales 1 es el diseño patrón el cual sirvió para realizar las comparaciones pertinentes y los 4 restantes fueron variaciones entre el vidrio y la cascara de huevo (3%Vidrio trirurado+1%Cascara de Huevo molido, 3% Vidrio triturado +2% Cascara de Huevo molido, 5% Vidrio triturado +1% Cascara de Huevo molido Y 5% Vidrio triturado +2% Cascara de Huevo molido). Nuestra población fueron 90 probetas cilíndricas, de las cuales 45 fueron sometidas a ensayo a compresión y los 45 restantes a ensayo a tracción, estas fueron estudiadas a edades de 7, 14 y 28 días de vaciadas, las cuales fueron debidamente curadas. Para concluir, el resultado que arrojo el concreto patrón supera el diseño f´c = 210kg/cm2 mientras tanto el concreto experimental en sustitución del 3% de vidrio triturado, 1% y 2% de cascara de huevo lograron superar el diseño patrón, por otro lado, la combinación de 5% de vidrio triturado y 1% y 2% de cascara de huevo no lograron superar la resistencia patrón, por el contrario, disminuyeron considerablemente la resistencia.

The present research basically focuses on the comparative study of the compressive and tensile strength of concrete in cylindrical specimens, designed at a strength of f'c = 210kg/cm2, replacing 3% and 5% of the coarse aggregate with crushed glass and replacing 1% and 2% of cement with ground eggshell, which were tested in the laboratory according to Peruvian standards. Five types of mix design were carried out, of which one was the standard design, which was used to make the pertinent comparisons, and the other four were variations between glass and eggshell (3% crushed glass+1% ground eggshell, 3% crushed glass +2% ground eggshell, 5% crushed glass +1% ground eggshell and 5% crushed glass +2% ground eggshell). Our population consisted of 90 cylindrical specimens, of which 45 were subjected to compression test and the remaining 45 to tensile test, these were studied at ages of 7, 14 and 28 days after casting, which were duly cured. To conclude, the results obtained with the standard concrete exceeded the design f'c = 210kg/cm2 while the experimental concrete in substitution of 3% crushed glass, 1% and 2% eggshell were able to exceed the standard design. On the other hand, the combination of 5% crushed glass and 1% and 2% eggshell were not able to exceed the standard resistance, on the contrary, they considerably decreased the resistance.
Enlace al repositorio: https://hdl.handle.net/11537/33260
Nota: San Juan de Lurigancho
Disciplina académico-profesional: Ingeniería Civil
Institución que otorga el grado o título: Universidad Privada del Norte. Facultad de Ingeniería
Grado o título: Ingeniero Civil
Jurado: Vereau Miranda, Edmundo; Manturano Chipana, Ruben Kevin; Neyra Torres, Jose Luis
Fecha de registro: 4-may-2023; 4-may-2023



Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons