Look-up in Google Scholar
Title: Diseño de mezcla de concreto translúcido aplicando agregados que permiten el paso de luz, Lima – 2021
Advisor(s): Campos Vasquez, Neicer
OCDE field: https://purl.org/pe-repo/ocde/ford#2.01.01
Issue Date: 17-Jun-2022
Institution: Universidad Privada del Norte
Abstract: The objective of this work is to carry out a mix design for translucent concrete using aggregates that allow the passage of light, therefore, an analysis related to the translucent concrete mix design was carried out, in a time interval of 10 years, to define what type of aggregates, additives and w/c ratio, are the ones that will provide the greatest benefit to the final product. For this, a mix design for translucent concrete was proposed, referring to ACI 211.1, since different aggregates such as tempered glass, quartz, white cement and also a plasticizing additive will be used to obtain an optimal design for translucent concrete. In addition, application cases with additive were carried out, in order to obtain different mix designs with the properties of translucency and resistance to compression, with these designs it was concluded that quartz and Ottawa sand are the aggregates that most favor the passage of light, however, using glass at 40% and quartz at 60% in the mix design gives moderate translucency to the mix, finally it was defined that the possible applications of this type of concrete are given for glass block type partitions and false ceiling , that is, for non-bearing aesthetic structures.

El presente trabajo tiene como objetivo realizar un diseño de mezcla para concreto translúcido utilizando agregados que permiten el paso de luz, por ello, se realizó un análisis relacionado al diseño de mezcla de concreto translúcido, en un intervalo de tiempo de 10 años, para definir qué tipo de agregados, aditivos y relación a/c, son los que otorgaran un mayor beneficio al producto final. Para ello se propuso un diseño de mezcla para concreto translúcido referenciando al ACI 211.1, ya que se utilizará distintos agregados como vidrio templado, cuarzo, cemento blanco y también aditivo plastificante para obtener un diseño óptimo para concreto translúcido. Además, se realizó casos aplicativos con aditivo, con la finalidad de obtener distintos diseños de mezcla con las propiedades de translucidez y resistencia a la compresión, con estos diseños se concluyó que el cuarzo y la arena Ottawa son los agregados que más favorecen al paso de luz, no obstante, usar vidrio al 40% y cuarzo al 60% en el diseño de mezcla otorga translucidez moderada a la mezcla, finalmente se definió que las posibles aplicaciones de este tipo de concreto están dadas para tabiquería tipo block de vidrio y techo falso, es decir, para estructuras estéticas no portantes.
Note: Breña
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Privada del Norte. Facultad de Ingeniería
Grade or title: Ingeniero Civil
Juror: Vereau Miranda, Edmiundo; Torres Flores, Marko Anibal; Neyra Torres, Jose Luis
Register date: 27-Jul-2022; 27-Jul-2022



This item is licensed under a Creative Commons License Creative Commons