Look-up in Google Scholar
Title: Diseño, construcción, y prueba de eficiencia de un winche con motor de motosierra
Advisor(s): Campos Romero, Rene; Bozovich Granados, Milo
OCDE field: https://purl.org/pe-repo/ocde/ford#4.01.02
Issue Date: 2022
Institution: Universidad Nacional Agraria La Molina
Abstract: This work is based on the need to generate local technology for the management of forest plantations that allow the execution of skidding at low costs. In this sense it has designed a prototype chainsaw winch with an idea the remove from the forest logs from thinning of forest plantations. For this purpose we used the drive unit Chainsaw Stihl 070, which is quite widespread at the national level, coupled to a gearbox type worm, a drum for the cable, and the saw chain transmission of movement. The drum is designed according to the power of the drive unit, cable length and diameter. The forces that underwent analyzed. To check the effectiveness of the prototype operations yarding were conducted in a plantation submitted to thinning in Oxapampa determining its convenience and productivity of skidding in m³/ h through a study of the variables: distance, volume and time, we determine the cost of running for day and thus calculate the cost per cubic meter of skidding. It also analyzes a time study for phases of skidding are performed. It is shown that the winch chainsaw is an appropriate technology for the use of thinning of forest plantations. It is concluded that this must be improved lowest the size and weight of the chassis, and the creation of a mechanism to facilitate the winding of the cable. The performance test showed that the prototype is suitable for skidding in forestry plantations

El presente trabajo partió de la necesidad de generar tecnología local para realizar cortas de mejora en plantaciones forestales del país, actualmente no se dispone de tecnologías apropiadas y accesibles a las características y condiciones socio-económicas de los propietarios de las plantaciones; como resultado no se realizan cortas de mejora con la consecuente baja calidad de la madera y reducido crecimiento. Resulta necesario crear equipos que permitan realizar raleos oportunamente y a bajos costos. En tal sentido se diseñó un prototipo de winche-motosierra con la idea de desemboscar las trozas de los raleos de plantaciones forestales. El prototipo utilizó la unidad motriz de una motosierra marca Stihl 070, como generadora de movimiento, la que se encuentra bastante difundida en el ámbito nacional, que a la vez se empleó en la realización de operaciones de tumbado y trozado, a la cual se le acopló a una caja reductora del tipo tornillo sin fin y un tambor para el cable. Se acondicionó una sección de cadena de motosierra para la transmisión de movimiento. El tambor se diseñó de acuerdo a la potencia de la unidad motriz, longitud y diámetro del cable. Para comprobar la eficacia del prototipo se realizó operaciones de desembosque en una plantación sometida a raleo en Oxapampa – Pasco. Se analizaron las fuerzas a las que estuvo sometido el prototipo durante el trabajo activo. La prueba de eficacia demostró que el prototipo es adecuado para realizar desembosque en plantaciones forestales.
Note: Universidad Nacional Agraria La Molina. Facultad de Ciencias Forestales. Departamento Académico de Industrias Forestales
Discipline: Ciencias Forestales
Grade or title grantor: Universidad Nacional Agraria La Molina. Facultad de Ciencias Forestales
Grade or title: Ingeniero Forestal
Juror: Miguel Castro, Milciades Leónidas; Cano Delgado, José Carlos; Trujillo Cuellar, Florencio Teodoro
Register date: 2-Aug-2022; 2-Aug-2022



This item is licensed under a Creative Commons License Creative Commons