Look-up in Google Scholar
Title: Influencia del porcentaje de cal y cemento tipo I para estabilización de la subrasante en avenida Víctor Raúl, centro poblado El Carmelo, Virú, 2021
Advisor(s): Sagástegui Vásquez, Germán
OCDE field: https://purl.org/pe-repo/ocde/ford#2.01.01
Issue Date: 13-Dec-2021
Institution: Universidad Privada del Norte
Abstract: La presente investigación se realizó en Trujillo, en el laboratorio de cerámicos y suelos de la Universidad Nacional de Trujillo, se determinó la influencia de la cal y cemento tipo I en la estabilización de la subrasante de la avenida Víctor Raúl, centro poblado el Carmelo, provincia de Virú. Para esta esta tesis se utilizó un diseño experimental, cuasi experimental, el muestreo fue no probabilístico por juicio, la recolección de datos se realizó mediante la técnica de observación, el instrumento usado fue la guía de observación. Para esta investigación se realizó 4 calicatas y se realizó ensayos de CBR agregando 8% y 10% de cal y cemento, logrando aumentar su CBR de 5.75% hasta 54.50% con cal y 57.94% con cemento, una resistencia de 0.90 kg/cm2 hasta 2.00 kg/cm2 con cal y 2.05 kg/cm2 con cemento para compresión no confinada, para Proctor la M.D.S. paso de 1.54 gr/cm3 a 1.86 gr/cm3 con cemento y 1.80 gr/cm3 con cal, su contenido de humedad optimo paso de 18% a 12% con cemento, de 16% a 12% con cal. Se concluye que ambos estabilizantes en estas cantidades de 8% y 10% logran una subrasante excelente, pero con el 10% de cemento se logran los valores más altos.

The present research was carried out in Trujillo, in the laboratory of ceramics and soils of the National University of Trujillo, the influence of lime and cement type I in the stabilization of the subgrade of Victor Raul Avenue in the town of El Carmelo, province of Viru was determined. For this thesis an experimental, quasi-experimental design was used, the sampling was non-probabilistic by judgment, the data collection was carried out by means of the observation technique, the instrument used was the observation guide. For this research, 4 pits were dug and CBR tests were performed by adding 8% and 10% of lime and cement, achieving an increase in CBR from 5.75% to 54.50% with lime and 57.94% with cement, a resistance of 0.90 kg/cm2 to 2.00 kg/cm2 with lime and 2.05 kg/cm2 with cement for unconfined compression. 00 kg/cm2 with lime and 2.05 kg/cm2 with cement for unconfined compression, for Proctor the M.D.S. went from 1.54 gr/cm3 to 1.86 gr/cm3 with cement and 1.80 gr/cm3 with lime, its optimum moisture content went from 18% to 12% with cement, from 16% to 12% with lime. It is concluded that both stabilizers in these quantities of 8% and 10% achieve an excellent subgrade, but with 10% cement the highest values are obtained.
Note: Trujillo San Isidro
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Privada del Norte. Facultad de Ingeniería
Grade or title: Ingeniero Civil
Juror: Rubio Herrera, Sonia; Rodríguez Beltrán, Eduar José; Alvarado Ruiz, Cinthya
Register date: 15-Jun-2022; 15-Jun-2022



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.