Look-up in Google Scholar
Title: Evaluación de la adhesión de junta de construcción del concreto vaciado en dos etapas con y sin puente de adherencia en vigas debido a esfuerzos por flexión
Advisor(s): Gonzales Garcia, Juan Esteban
OCDE field: https://purl.org/pe-repo/ocde/ford#2.01.01
Issue Date: 17-Jan-2022
Institution: Universidad Privada del Norte
Abstract: La presente investigación tiene como objetivo evaluar la adhesión de concreto nuevo con concreto ya endurecido o también llamada técnicamente como junta de construcción, las muestras son sometidos a esfuerzos por flexión y se determinan su comportamiento estructural. La metodología de la investigación es la aplicación de puente de adherencia en vigas a escalas reducida, se definen los parámetros con muestras de tres vigas con junta de construcción con puente de adherencia, tres vigas con junta de construcción sin puente de adherencia y tres vigas monolíticas, estas son sometidas a pruebas de flexión en una máquina de cargas, y así determinar su grado de adhesión mediante la comparación del comportamiento estructural, las vigas con junta de construcción son vaciadas en dos etapas, primer vaciado es hasta dos tercios de la longitud y pasada 24 horas se vacía el tercio faltante. El análisis es comparativo entre los tres grupos de vigas para realizar un promedio con los resultados más representativos determinado por la distribución normal. Una vez realizado las pruebas de laboratorio se determina que para las vigas con junta de construcción con puente de adherencia tiene un mejor comportamiento estructural frente a las vigas monolíticas, y una mejor adhesión de la junta de construcción que las vigas sin puente de adherencia. Y por ello se concluye que la evaluación de las vigas con junta de construcción con puente de adherencia da como resultado una adherencia optima y segura frente a juntas sin tratamiento.

The objective of this research is to evaluate the adhesion of new concrete with already hardened concrete or also technically called a construction joint, the samples are subjected to bending stresses and their structural behavior is determined. The research methodology is the application of an adhesion bridge in beams at reduced scales, the parameters are defined with samples of three beams with a construction joint with an adhesion bridge, three beams with a construction joint without an adhesion bridge, and three monolithic beams. , these are subjected to flexural tests in a loading machine, and thus determine their degree of adhesion by comparing the structural behavior, the beams with a construction joint are cast in two stages, the first casting is up to two thirds of the length and after 24 hours the missing third is emptied. The analysis is comparative between the three groups of beams to make an average with the most representative results determined by the normal distribution. Once the laboratory tests have been carried out, it is determined that for the beams with a construction joint with an adhesion bridge, it has a better structural behavior compared to monolithic beams, and a better adhesion of the construction joint than the beams without an adhesion bridge. And for this reason it is concluded that the evaluation of the beams with a construction joint with an adhesion bridge results in an optimal and safe adherence against joints without treatment.
Note: Los Olivos
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Privada del Norte. Facultad de Ingeniería
Grade or title: Ingeniero Civil
Juror: Vildoso Flores, Alejandro; Tello Malpartida, Omart Demetrio; Vega Rivera, Gerson Elías
Register date: 5-Apr-2022; 5-Apr-2022



This item is licensed under a Creative Commons License Creative Commons