Buscar en Google Scholar
Título: Evaluación estructural de edificios de uso multifamiliar diseñados con la norma sismorresistente E.030 1977 utilizando la norma E.030 2016
Asesor(es): Moreno Sanchez, Javier Daniel
Fecha de publicación: 13-feb-2020
Institución: Universidad Peruana de Ciencias Aplicadas (UPC)
Resumen: En la actualidad, en Lima abundan edificaciones en funcionamiento que poseen más de 25 años de antigüedad o exceden su tiempo de vida útil. En tal contexto, el comportamiento de una edificación de uso común construida en aquellos años y bajo criterios sísmicos que tenían pocos antecedentes de movimientos telúricos en comparación a los criterios contemplados en nuestra normativa actual, podría constituir un riesgo latente ante un gran sismo. El objetivo de este trabajo es realizar una evaluación estructural de 4 edificios multifamiliares diseñados con la norma E.030 de 1977 mediante los criterios dados por la Norma E.030 del 2016 a través de métodos de análisis sísmico lineal estático y dinámico modal-espectral. Lo primero que se desarrolló para la evaluación estructural fue la recopilación de información de las edificaciones con una antigüedad promedio de 25 años, para luego realizar el modelamiento estructural en el programa ETABS y, posteriormente, realizar el análisis sísmico en los 4 edificios. Seguidamente se verificó el cumplimiento de derivas, las juntas sísmicas mínimas y la resistencia de los elementos estructurales a los esfuerzos obtenidos por el software. Se verificó también la cortante de la edificación y la interacción viga – columna. Los resultados obtenidos muestran que solo un edificio del total cumple con la deriva permisible de la norma, sin embargo, en 3 de 4 edificios se vuelve considerable la presunta falla de unión viga- columna.

Today, in Lima there are buildings in operation of more than 25 years old or exceeding their useful life. In this context, the behavior of a building commonly used built in those years and under seismic criteria that had little history of quakes compared to the criteria in our current legislation, could be a latent risk to an eventual earthquake of great consideration. The aim of this work is to conduct a structural assessment 4 multifamily buildings designed with the E.030 standard 1977 using the criteria given by the Earthquake Resistant Standard E.030 2016 through static and dynamic methods of nonlinear seismic analysis modal-spectral. The first thing that was developed for the structural evaluation was the collection of information on the buildings with an average age of 25 years, to then carry out the structural modeling in the ETABS program and, subsequently, perform the seismic analysis in the 4 buildings, which have a dual structural system of reinforced concrete. Next, compliance with drifts, minimum seismic joints and the resistance of the structural elements to the efforts obtained by the software were verified. The shear of the building and the beam - column interaction were also verified. The results show that only the total building meets the allowable derived from standard E.030 2016; however, on 3 of 4 buildings becomes considerably the alleged failure of beam-column joint.
Enlace al repositorio: http://hdl.handle.net/10757/651680
Disciplina académico-profesional: Ingeniería Civil
Institución que otorga el grado o título: Universidad Peruana de Ciencias Aplicadas (UPC). Facultad de ingeniería
Grado o título: Ingeniero Civil
Fecha de registro: 8-abr-2020; 8-abr-2020



Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons