Buscar en Google Scholar
Título: Importancia del método de madurez en la obtención de la resistencia del concreto para un f'c=21 MPa, con una mezcla de cemento tipo I y tipo ICO, en la ciudad de Trujillo 2021
Asesor(es): Vásquez Díaz, Alberto
Campo OCDE: https://purl.org/pe-repo/ocde/ford#2.01.01
Fecha de publicación: 25-oct-2021
Institución: Universidad Privada del Norte
Resumen: La presente investigación buscar dar importancia de la resistencia del concreto mediante el método de madurez en la ciudad de Trujillo, la cual se realizó mediante la técnica de observación experimental con la preparación de 40 probetas con diseños de mezcla de concreto elaborados con diferentes tipos de cemento: MS e ICO, en donde se hizo uso de las normas estandarizadas de ASTM C39 para la resistencia a la compresión y NTP 339.217 para la estimación de la resistencia por madurez, donde se usaron 2 sensores como parte del proyecto para determinar la temperatura. Se determinó para cada diseño de mezcla elaborado con cemento tipo MS e ICO, la curva de calibración, el valor de madurez (°Cxh), el tiempo necesario en que se logra obtener el f’c objetivo del estudio de 21 MPa; por último, se desarrolló la comparación entre el tiempo necesario que requiere llegar a una resistencia del concreto de 21 MPa entre los métodos usados de las normas estandarizadas. En conslusión, se mostró que los valores por el método de madurez se predicen con mayor efectividad.

The present imvestigations aims to show the importance of the resistance of concrete through the method of maduration in the city of Trujillo, which was carried out through the technic of experimental observation with the preparation of 40 test tubes with a mixture of concrete with different types of cement: MS and ICO, where the ASTM C39 standardized norms were used for compression resistance, and NTP 339.217 for the resistance estimation for maturity, where 2 sensors were used as part of the project in order to determine the temperature. The curve of the calibration of the mixtures of concrete, the value of maturity (°Cxh), the necessary time in order to obtain the f°c objective of the 21 MPa study for each mixture of concrete with the MS and ICO types were determined. Finally, a comparison between the necessary time that is required in order to come to a resistence of the 21 MPa concrete as well as the methods was developed. To conclude, the values for the maturity method showed to be of greater effectiveness.
Enlace al repositorio: https://hdl.handle.net/11537/28876
Nota: Trujillo San Isidro
Disciplina académico-profesional: Ingeniería Civil
Institución que otorga el grado o título: Universidad Privada del Norte. Facultad de Ingeniería
Grado o título: Ingeniero Civil
Jurado: Rubio Herrera, Sonia; Cornejo Rodriguez, Sheyla; Azañedo Medina, Wiston
Fecha de registro: 7-dic-2021; 7-dic-2021



Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons