Buscar en Google Scholar
Título: Influencia de tres niveles de fibra de furcraea andina (penca) sobre la resistencia a la compresión del concreto f’c= 210 kg·cm-²
Asesor(es): Ravines Azañero, Irene del Rosario
Campo OCDE: https://purl.org/pe-repo/ocde/ford#2.01.01
Fecha de publicación: 21-jun-2018
Institución: Universidad Privada del Norte
Resumen: RESUMEN En la presente tesis se toma énfasis la tecnología del concreto, así como también el uso de materiales no convencionales, para la presente investigación que se usó agregados de la cantera Bazán (carretera Bambamarca 1.5 km), Para ello se determinó las características físico-mecánicas de los agregados de acuerdo a las especificaciones N.T.P 400.037/ASTM C33, para luego realizar el diseño de mezclas del concreto patrón empleando el método del comité ACI 211 utilizando cemento Tipo I, así mismo se incorporó fibra de Furcraea Andina como aditivo en diferentes porcentajes (0.75%, 0.50%, 0.25%) con respecto al agregado fino, para posteriormente determinar su influencia en la resistencia del concreto f’c= 210 kg·cm-2 , mediante ensayos mecánicos a los 7, 14, 21 y 28 días, verificándose que al 0.75% de fibra de Furcraea Andina con respecto al peso del agregado fino, ensayada a los 28 días muestran considerablemente una disminución en la resistencia a compresión axial del concreto, disminuyendo el esfuerzo máximo en un 51.28%, los resultados de los ensayos de compresión axial del concreto elaborado con adición al 0.50% de Furcraea Andina con respecto al peso del agregado fino, ensayada a los 28 días, muestran una disminución en la resistencia a compresión axial del concreto, disminuyendo el esfuerzo máximo en un 30.02%, debido a que cada probeta elaborada contiene mucha fibra por lo cual la pasta de cemento no se adhiere correctamente al agregado, lo cual se observa cuando las muestras de concreto son ensayadas a compresión axial, lo que hace que falle es la pasta de cemento; los resultados de los ensayos de compresión axial del concreto elaborado con adición al 0.25% de Furcraea Andina con respecto al peso del agregado fino, ensayada a los 28 días, muestran una disminución de 14.64% en la resistencia a compresión axial del concreto, debido a que cada probeta elaborada contiene menos fibra que las demás dosificaciones por lo cual la pasta de cemento permite que se adhiere correctamente al agregado, sin embargo no logra superar la muestra patrón, lo cual se observa cuando las muestras de concreto que son ensayadas a compresión axial, concluyendo que la hipótesis no se cumple.

ABSTRACT In this thesis the emphasis is on concrete technology, as well as the use of non-conventional materials, for the present investigation that aggregates were used from the Bazán quarry (Bambamarca road 1.5 km). For this, the physical-mechanical characteristics were determined. of the aggregates according to the specifications NTP 400.037 / ASTM C33, to then make the design of mixtures of the standard concrete using the method of the ACI 211 committee using Type I cement, likewise Furcraea Andina fiber was incorporated as an additive in different percentages ( 0.75%, 0.50%, 0.25%) with respect to the fine aggregate, to later determine its influence on the concrete strength f'c = 210 kg · cm-2, through mechanical tests at 7, 14, 21 and 28 days, verifying that at 0.75% fiber of Furcraea Andina with respect to the weight of the fine aggregate, tested at 28 days show a considerable decrease in the resistance to axial compression of the concrete, decreasing the maximum effort by 51.28%, the results of the tests of axial compression of the concrete made with addition to 0.50% of Furcraea Andina with respect to the weight of the fine aggregate, tested at 28 days, show a decrease in the resistance to axial compression of concrete, decreasing the maximum effort by 30.02%, because each processed specimen contains a lot of fiber, so the cement paste does not adhere correctly to the aggregate, which is observed when the concrete samples are tested to axial compression, what makes it fail is the cement paste; the results of the axial compression tests of concrete made with addition to 0.25% of Furcraea Andina with respect to the weight of the fine aggregate, tested at 28 days, show a decrease of 14.64% in the resistance to axial compression of the concrete, due to that each processed specimen contains less fiber than the other dosages, so the cement paste allows it to adhere correctly to the aggregate, however it can not overcome the standard sample, which is observed when the concrete samples that are tested by axial compression , concluding that the hypothesis is not fulfilled
Enlace al repositorio: https://hdl.handle.net/11537/13483
Nota: Cajamarca
Disciplina académico-profesional: Ingeniería Civil
Institución que otorga el grado o título: Universidad Privada del Norte. Facultad de Ingeniería
Grado o título: Ingeniero Civil
Fecha de registro: 2-jul-2018; 2-jul-2018



IMPORTANTE
La información contenida en este registro es de entera responsabilidad de la universidad, institución o escuela de educación superior que administra el repositorio académico digital donde se encuentra el trabajo de investigación y/o proyecto, los cuales son conducentes a optar títulos profesionales y grados académicos. SUNEDU no se hace responsable por los contenidos accesibles a través del Registro Nacional de Trabajos de Investigación – RENATI.