Buscar en Google Scholar
Título: Implementación de un sistema de seguridad y salud en el trabajo, según Ley N° 29783, para reducir accidentes en la empresa Automotriz y Maquinarias Ingenieros S.R.L.
Asesor(es): Mendoza Azañero, Ana Rosa
Campo OCDE: https://purl.org/pe-repo/ocde/ford#2.11.04
Fecha de publicación: 28-sep-2020
Institución: Universidad Privada del Norte
Resumen: The objective of this study is to implement an occupational health and safety management system based on Law 29783 to reduce accidents in the company AUTOMOTRIZ Y MAQUINARIAS INGENIEROS S.R.L. Initially, a diagnosis of the current situation of the occupational health and safety system was made, by evaluating a compliance check list (baseline) established by RM 005-2013-TR, obtaining a percentage of 8.37%, classifying to the system as not acceptable. Likewise, a documentary review of the occurrence of accidents was carried out, determining the frequency and severity indicators, to obtain the accident rate indicator of 58.79%. Based on our situational analysis, the design and implementation of the system was carried out and it was determined that compliance with the regulations improved to 100%, therefore the accident rate indicator was reduced to 0%, showing the inversely proportional relationship between the occurrence of accidents and the guidelines required by the regulations. Finally, the cost-benefit analysis was obtained as result 5.15 indicating that the project must be accepted since it generates greater benefits for the company, taking care of the life and health of the worker compared to the investment involved in the implementation of the Safety Management System and Occupational Health.

El presente estudio tiene por objetivo implementar un sistema de gestión de seguridad y salud ocupacional en base a la Ley 29783 para reducir los accidentes en la empresa AUTOMOTRIZ Y MAQUINARIAS INGENIEROS S.R.L. Inicialmente se realizó un diagnóstico de la situación actual del sistema de seguridad y salud en el trabajo, mediante la evaluación de un check list (línea base) de cumplimiento establecido por la RM 005-2013-TR, obteniendo un porcentaje de 8.37%, clasificando al sistema como no aceptable. Así mismo, se realizó una revisión documentaria de la ocurrencia de los accidentes, determinando los indicadores de frecuencia y gravedad, para obtener el indicador de accidentabilidad de 58.79%. En base a nuestro análisis situacional se realizó el diseño e implementación del sistema y se determinó que el cumplimiento de la normativa mejoró a un 100%, por ende, el indicador de accidentabilidad se redujo a un 0%, evidenciando la relación inversamente proporcional entre la ocurrencia de accidentes y los lineamentos exigidos por la normativa. Finalmente se realizó el análisis beneficio-costo se obtuvo como resultado 5.15 indicándonos que el proyecto debe ser aceptado ya que genera mayor beneficio para la empresa, cuidar la vida y salud del trabajador comparado con la inversión que implica la implementación del Sistema de Gestión de Seguridad y Salud en el Trabajo.
Enlace al repositorio: https://hdl.handle.net/11537/24830
Nota: Cajamarca
Disciplina académico-profesional: Ingeniería Industrial
Institución que otorga el grado o título: Universidad Privada del Norte. Facultad de Ingeniería
Grado o título: Ingeniero Industrial
Jurado: Tello Legoas, Frank Alberto; Arana Arana, Katherine del Pilar; Gonzales Abanto, Wilson Alcides
Fecha de registro: 19-ene-2021; 19-ene-2021



Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons