Look-up in Google Scholar
Title: Modelamiento hidrológico e hidráulico para evaluación de áreas inundables en el Río Pisco, tramo 6+500 al 7+900
Advisor(s): Fano Miranda, Gonzalo Ramcés
OCDE field: http://purl.org/pe-repo/ocde/ford#1.05.11
Issue Date: 2020
Institution: Universidad Nacional Agraria La Molina
Abstract: In the present investigation, with the objective of determining the areas susceptible to flooding in the Pisco river in the section where the towns of Tupac Amaru and San Clemente are located, we have studied the incidence that the maximum annual rainfall could have in 24 hours in the generation of maximum flows in the Pisco River Basin. Rainfall information was analyzed, using statistical tools, to calculate probable instantaneous rainfall in a six-hour storm whose return periods are 10, 25, 50, 100 and 500 years. Subsequently, a hydrological model was applied through a systematized process of precipitation-runoff, obtaining the maximum flows that run through the point of application from where the basin was delimited. The flows obtained were used to simulate the surface runoff for the valley of the Pisco river by means of a hydraulic model for the same return periods. Finally, with the use of geographic information systems (GIS) and the topography of the channel, the areas susceptible to flooding in this sector of the Pisco river were determined.

En La presente investigación, con el objetivo de determinar las áreas susceptibles a inundación en el rio Pisco en el tramo donde se encuentran los poblados de Tupac Amaru y San Clemente, se ha estudiado la incidencia que podrían tener las precipitaciones máximas anuales en 24 horas en la generación de caudales máximos en la Cuenca del rio Pisco. Se analizó información pluviométrica, con el uso de herramientas estadísticas, para calcular probables precipitaciones instantáneas en una tormenta de seis horas cuyos periodos de retorno son 10, 25, 50, 100 y 500 años. Posteriormente se aplicó un modelo hidrológico mediante un proceso sistematizado de precipitación-escorrentía obteniendo los caudales máximos que discurren por el punto de aplicación desde donde se delimitó la cuenca. Los caudales obtenidos fueron utilizados para simular la escorrentía superficial para el valle del rio Pisco mediante un modelo hidráulico para los mismos periodos de retorno. Finalmente, con el uso de sistemas de información geográfica (SIG) y la topografía del cauce se determinaron las áreas susceptibles a inundación en este sector del rio Pisco.
Note: Universidad Nacional Agraria La Molina. Facultad de Ingeniería Agrícola. Departamento Académico de Recursos Hídricos
Discipline: Ingeniería Agrícola
Grade or title grantor: Universidad Nacional Agraria La Molina. Facultad de Ingeniería Agrícola
Grade or title: Ingeniero Agrícola
Juror: Apaclla Nalvarte, Ricardo; Ramos Taipe, Cayo Leonidas; Sánchez Delgado, Miguel Ángel
Register date: 7-Aug-2020; 7-Aug-2020



This item is licensed under a Creative Commons License Creative Commons