Buscar en Google Scholar
Título: Optimización del cemento portland tipo I en el concreto dosificado con los aditivos Sika Cem plastificante y Sika Cem acelerante PE, en la ciudad de Lima - 2018
Asesor(es): Colonio García, Luis
Campo OCDE: https://purl.org/pe-repo/ocde/ford#2.01.01
Fecha de publicación: 2018
Institución: Universidad Privada del Norte
Resumen: La presente investigación se ha realizado con el fin de optimizar la cantidad de cemento en concreto dosificado con cemento Portland tipo I adicionando los aditivos Sika Cem Acelerante y Sika Cem Plastificante PE. Para ello, se ha analizado dos grupos, primero, el concreto sin aditivo o patrón y otro adicionando diferentes porcentajes de aditivos Sika Cem Acelerante al 2.5% y Sika Cem Plastificante al 1%. En el concreto con aditivo se analiza dos casos, primero, manteniendo el contenido de agua constante y el segundo manteniendo constante el slump, analizando en estado fresco, como asentamiento, peso unitario, exudación, contenido de aire, tiempo de fragua, y en estado endurecido resistencia a la compresión. Según los resultados de laboratorio, se demuestra que el uso de los aditivos Sika Cem Acelerante y Sika Cem Plastificante PE en las mezclas de concreto, presenta mejores resultados con respecto al concreto patrón, tanto en la trabajabilidad como en la resistencia a la compresión.

The present investigation was carried out in order to evaluate the concrete design with Portland cement type I adding the additives Sika Cem Acelerante y Sika Cem Plastificante PE. The general objective of this study was to determine the influence of the additive sikament-290N on concretes made with portland type I cement. For this purpose, two groups were analyzed, first, concrete without additive or standard and another adding different percentages of additives Sika Cem Acelerante in 2.5% and Sika Cem Plastificante PE in 1%. In concrete with additive, two cases are analyzed, first, keeping the water content constant and the second keeping the slump constant, analyzing in fresh state, such as settlement, unit weight, exudation, air content, forge time, and in state Hardened compressive strength. According to the laboratory results, it is demonstrated that the use of these additives Sika Cem Acelerante y Sika Cem Plastificante PE in the concrete mixtures, presents better results with respect to the standard concrete, as much in the workability as in the resistance to the compression, presenting improvements in the slump. In the resistance with additives in its maximum dosage, all this compared with the standard concrete.
Enlace al repositorio: https://hdl.handle.net/11537/15258
Nota: Los Olivos
Disciplina académico-profesional: Ingeniería Civil
Institución que otorga el grado o título: Universidad Privada del Norte. Facultad de Ingeniería
Grado o título: Ingeniero Civil
Fecha de registro: 28-mar-2019; 28-mar-2019



Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons