Buscar en Google Scholar
Título: Propuesta de estabilización con cal para subrasantes con presencia de suelos arcillosos en bofedales y su influencia en el pavimento rígido bajo la metodología de diseño AASHTO 93 aplicado al tramo 1 de la carretera Oyón-Ambo
Otros títulos: Proposal for stabilization with lime for subgrades with the presence of clay soils in bofedales and its influence on rigid pavement under the AASHTO 93 design methodology applied to section 1 of the Oyón-Ambo highway
Asesor(es): Silvera Lima, Manuel Elias
Fecha de publicación: 22-may-2019
Institución: Universidad Peruana de Ciencias Aplicadas (UPC)
Resumen: Section I of the project "Improvement of the Oyón - Ambo highway" comprises 48, 9 km in length and benefits to 93,878 users between the departments of Lima and Huánuco. The project consists of a road with flexible pavements and rigid pavements. Throughout the design, areas, things, things, other complexes have been identified. As a solution in the technical file has been used the use of biaxial geogrids and geotextiles, in addition to having been designed the rigid pavement under the methodology AASHTO 93. The present investigation is oriented in three stages. In the first, it will stabilize with the most representative type of soil in the critical areas of bofedales. In the second, the structural package of the road will be designed under the rigid pavement AASHTO 93 and MPEDG design methodology. Finally, in the third stage the influence of the stabilization proposed in the design of rigid pavement will be analyzed. The final results of this investigation are two. On the one hand, the optimum percentage of dosage of times is 10% and the CBR of natural soil has increased 7 times the initial value. On the other hand, there are two designs of rigid pavements with reductions of 2 cm. and 7 cm. of pavement slab in the comparison of the design presented in the technical file.

El Tramo I del proyecto “Mejoramiento de la carretera Oyón – Ambo” comprende 48, 9 km de longitud y beneficia a 93,878 usuarios entre los departamentos de Lima y Huánuco. El proyecto consiste en una vía con tramos de pavimento flexible y pavimento rígido. A lo largo del diseño se han identificado zonas críticas por las que debe atravesar la vía de las cuales los bofedales son los más complejos. Como medida de solución en el expediente técnico se ha propuesto el uso de geomallas biaxiales y geotextiles además de haber diseñado el pavimento rígido bajo la metodología AASHTO 93. La presente investigación está orientada en tres etapas. En la primera, se estabilizará con cal el tipo de suelo más representativo en las zonas críticas de bofedales. En la segunda, se diseñará el paquete estructural de la vía bajo la metodología de diseño de pavimento rígido AASHTO 93 y MPEDG. Finalmente, en la tercera etapa se analizará la influencia de la estabilización planteada en el diseño de pavimento rígido. Los resultados finales de esta investigación son dos. Por un lado, el porcentaje óptimo de dosificación de cal es de 10% y el CBR del suelo natural se ha incrementado en 7 veces el valor inicial. Por otro lado, se presentan dos diseños de pavimentos rígidos con reducciones de 2 cm. y 7 cm. de losa de pavimento en comparación del diseño presentado en el expediente técnico.
Enlace al repositorio: http://hdl.handle.net/10757/625903
Disciplina académico-profesional: Ingeniería Civil
Institución que otorga el grado o título: Universidad Peruana de Ciencias Aplicadas (UPC). Facultad de ingeniería
Grado o título: Ingeniero Civil
Fecha de registro: 21-jun-2019; 21-jun-2019



Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons