Buscar en Google Scholar
Título: Evaluación del cloruro férrico y sulfato de aluminio, como coagulantes en el proceso de potabilización, en términos de turbidez y potencial de hidrógeno, de las aguas de la quebrada Rumiyacu, distrito de Moyobamba
Asesor(es): Valverde Vera, Mirtha Felicita
Campo OCDE: https://purl.org/pe-repo/ocde/ford#2.11.02
Fecha de publicación: 2017
Institución: Universidad Nacional de San Martín. Fondo Editorial
Resumen: La presente investigación pretendió comparar el sulfato de aluminio y cloruro férrico para la remoción de turbidez; evaluando como variaría el potencial de hidrogeno, con el propósito de determinar cuál de estos dos coagulantes sería el más óptimo para el proceso de tratamiento. Se obtuvieron los siguientes resultados: Para los meses de mayo y junio del 2017, en las muestras de agua de la quebrada Rumiyacu, la turbidez y pH son variables y más altas en el mes de junio por las lluvias; el tiempo y velocidad óptima encontrada para todos los ensayos realizados con sulfato de aluminio, es de 200 r.p.m. a 1,5 min y para todos los ensayos realizados con cloruro férrico, es de 300 r.p.m. a 1,5 min. La dosis óptima encontrada para las velocidades de sulfato de aluminio al 1% es de 1 mL de Al2 (SO4)3 /500 mL de agua y para las diferentes velocidades de cloruro férrico al 1% es de 6 mL de FeCl3 /500 mL. Por ello podemos decir que los coagulantes (cloruro férrico y sulfato de aluminio), actúan de distintas maneras para los parámetros de pH y turbidez, siendo el sulfato de aluminio un excelente coagulante ya que como el agua es alcalina este amortigua la variación pH sin provocar acidez y mejorando en casi un 100% la turbidez, llegando a estar acode a los LMP, así mismo se comprobó la eficiencia como floculante y ayudante al cloruro férrico que es más eficiente en el color del agua.

The following investigation tried to compare the aluminum sulfate and ferric chloride for the removal of turbidity; evaluating how the hydrogen potential would vary, in order to determine which of these two coagulants would be the most optimal for the treatment process. The following results were obtained: For the months of May and June 2017, in the water samples from the Rumiyacu stream, the turbidity and pH are variable and higher in the month of June due to the rains; The optimum time and speed found for all tests carried out with aluminum sulphate is 200 r.p.m. at 1.5 min and for all tests carried out with ferric chloride, it is 300 r.p.m. at 1.5 min. The optimum dose found for the 1% aluminum sulphate speeds is 1 mL of Al2 (SO4) 3/500 mL of water and for the different rates of 1% ferric chloride is 6 mL of FeCl3 / 500 mL. Therefore we can say that the coagulants (ferric chloride and aluminum sulfate), act in different ways for the parameters of pH and turbidity, aluminum sulfate being an excellent coagulant because as water is alkaline this buffer pH variation without causing acidity and improving the turbidity by almost 100%, getting to be in compliance with the LMP, likewise the efficiency was verified as a flocculant and assistant to the ferric chloride that is more efficient in the color of the water.
Enlace al repositorio: http://hdl.handle.net/11458/3044
Disciplina académico-profesional: Ingeniería Sanitaria
Institución que otorga el grado o título: Universidad Nacional de San Martín. Facultad de Ecología
Grado o título: Ingeniero Sanitario
Jurado: Rojas Vasquez, Juan Carlos; Azabache Liza, Yrwin Francisco; Olano Arevalo, Roydichan
Fecha de registro: 16-ene-2019; 16-ene-2019



Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons