Look-up in Google Scholar
Title: Influencia de los porcentajes de los relaves mineros en la resistencia a la compresión en bloques de concreto ensamblables, Trujillo 2019
Advisor(s): Azañedo Medina, Wiston Henry
OCDE field: https://purl.org/pe-repo/ocde/ford#2.01.01
Issue Date: 15-Aug-2020
Institution: Universidad Privada del Norte
Abstract: La investigación, tuvo como objetivo determinar la influencia de los porcentajes de relave minero (RM) sobre la resistencia a compresión en bloques de concreto ensamblables (BCE), reduciendo de tal manera la contaminación ambiental. Para la ejecución de la tesis se obtuvo el RM procedente de la Minera Quiruvilca, y agregados de la cantera San Martín S.A., a la cual se realizaron sus respectivos ensayos físicos. Además, el diseño de investigación fue probabilístico; con respecto a la recolección de datos se utilizó como técnica la observación y como instrumento la guía de observación. Por otro lado, se empleó la inferencia estadística para analizar los datos obtenidos. Se planteó el uso de relave minero como una alternativa para la elaboración de bloques de concreto, reemplazando el 46%, 48%, 50%, 52%, 54% y 56% del agregado fino. Se realizaron los ensayos de caracterización para los agregados y para el relave minero. Los especímenes para el ensayo a compresión fueron cilíndricos de 4” de diámetro y 8” de altura. El diseño más óptimo se dio con el 50% de RM sustituyendo el agregado fino, con valores de una resistencia promedio a los 28 días de 151.41 kg/cm2. Asimismo, dicho porcentaje se utilizó para la elaboración de los BCE y a su vez bloques patrones para realizar la comparación y ver su resistencia, dando resultados óptimos con el 50% de relave minero, siendo la resistencia promedio de 83.10 kg/cm2. En conclusión, la adición de relave minero influyó positivamente sobre la resistencia a la compresión del concreto.

The objective of the investigation was to determine the influence of the mining tailings (RM) percentages on the compressive strength in assembled concrete blocks (BCE), thereby reducing environmental contamination. For the execution of the thesis, the RM were obtained from the Quiruvilca Mine, and aggregates from the San Martín S.A. quarry, to which their respective physical tests were carried out. Furthermore, the research design was probabilistic; Regarding data collection, observation was used as a technique and the observation guide as an instrument. On the other hand, statistical inference was used to analyze the data obtained. The use of mining tailings was proposed as an alternative for the production of concrete blocks, replacing 46%, 48%, 50%, 52%, 54% and 56% of the fine aggregate. Characterization tests were carried out for the aggregates and for the mining tailings. The specimens for the compression test were cylindrical 4 "in diameter and 8" in height. The most optimal design was found with 50% of RM replacing the fine aggregate, with values of an average resistance at 28 days of 151.41 kg / cm2. Likewise, said percentage was used for the elaboration of the BCE and, in turn, pattern blocks to make the comparison and see their resistance, giving optimal results with 50% of mining tailings, the average resistance being 83.10 kg / cm2. In conclusion, the addition of mining tailings positively influenced the compressive strength of the concrete.
Note: Trujillo San Isidro
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Privada del Norte. Facultad de Ingeniería
Grade or title: Ingeniero Civil
Juror: Vásquez Díaz, Alberto Rubén; Cornejo Rodríguez, Sheyla Yuliana; Sagastegui Vásquez, Germán
Register date: 10-Nov-2020; 10-Nov-2020



This item is licensed under a Creative Commons License Creative Commons