Look-up in Google Scholar
Title: Evaluación de la calidad del dióxido de titanio en muestras para la fabricación de pinturas industriales base solvente y base agua
Advisor(s): Untiveros Bermúdez, Graciela Silvia
OCDE field: http://purl.org/pe-repo/ocde/ford#1.04.00
Issue Date: 2021
Institution: Universidad Peruana Cayetano Heredia
Abstract: El trabajo se centra en modificar y plantear un procedimiento más efectivo para la evaluación de la calidad del dióxido de titanio, haciendo posible la obtención de resultados fiables y escalables a nivel industrial sobre desempeño del pigmento en el producto final. Para este objetivo se modificará el procedimiento habitual y se adaptarán sus parámetros de acuerdo a las condiciones de trabajo de Planta de Producción. La información de la ficha técnica de una muestra de dióxido de titanio brinda un dato importante sobre su fabricación, por la vía cloruro y sulfato, lo que nos ayudaría a predecir los resultados de la evaluación y serán verificados en el laboratorio. Las evaluaciones de las muestras de dióxido de titanio se darán, durante y después de la fabricación de una pintura a base de poliuretano a nivel de laboratorio. El tiempo de dispersión es el parámetro más relevante en la elección de una muestra de dióxido de titanio para ser utilizada en la producción, siendo como máximo 10 minutos. La relación entre el diámetro del recipiente y el impulsador de alto corte es de 3 a 1; y la relación en peso entre la resina y el dióxido de titanio es de 4 a 1, siendo ambos ajustes proporcionales a las condiciones que se trabajan a nivel industrial. Empleando el procedimiento modificado, se han evaluado siete muestras de dióxido de titanio de diferentes proveedores, y entre ellos solo el R-1931 logró la fineza requerida en el tiempo óptimo establecido por el laboratorio y no tuvo problemas a nivel industrial.

The work is focused on modifying and proposing a more effective procedure for evaluating the quality of titanium dioxide, making it possible to obtain reliable and scalable results at an industrial level on the performance of the pigment in the final product. For this purpose, the usual procedure will be modified and its parameters will be adapted according to the working conditions of the Production Plant. The information in the technical data sheet of a titanium dioxide sample provides important information about its manufacture, via chloride and sulfate, which will help us predict the results of the evaluation and will be verified in the laboratory. Titanium dioxide sample evaluations will be given, during and after the manufacture of a polyurethane-based paint at the laboratory level. The dispersion time is the most relevant parameter in the choice of a titanium dioxide sample to be used in production, being a maximum of 10 minutes. The ratio of the diameter of the container to the high shear driver is 3 to 1; and the weight ratio between resin and titanium dioxide is 4 to 1, both adjustments being proportional to the conditions that are used at an industrial level. Using the modified procedure, seven samples of titanium dioxide from different suppliers have been evaluated, and among them only R-1931 achieved the required fineness in the optimal time established by the laboratory and had no problems at the industrial level.
Discipline: Química
Grade or title grantor: Universidad Peruana Cayetano Heredia. Facultad de Ciencias y Filosofía Alberto Cazorla Talleri
Grade or title: Licenciado en Química
Juror: Peirano Blondet, Francisco José; Barrenechea Pastor, Alberto
Register date: 23-Sep-2021; 23-Sep-2021



This item is licensed under a Creative Commons License Creative Commons