Buscar en Google Scholar
Título: Mejoramiento del diseño del shotcrete utilizando aditivo hiperplastificante GLENIUM TC-1300 para reducir la cantidad de shotcrete utilizada en rehabilitación de labores mineras subterráneas
Asesor(es): Hernández Diaz, Víctor Manuel
Campo OCDE: http://purl.org/pe-repo/ocde/ford#2.07.05
Fecha de publicación: 2023
Institución: Universidad Nacional de Ingeniería
Resumen: El presente trabajo de suficiencia profesional tuvo como objetivo principal obtener mejoras en el diseño del shotcrete usando el aditivo Hiperplastificante GLENIUM TC-1300 con el propósito de reducir los volúmenes de shotcrete usado para la rehabilitación del sostenimiento de las labores mineras. Para esto se realizaron pruebas de resistencia temprana al sostenimiento antes y después de la modificación, empleando un penetrómetro de aguja y una pistola Hilti. Los resultados demostraron que, el diseño de shotcrete con aditivo Hiperplastificante GLENIUM TC alcanza una resistencia a las 4 horas superior al shotcrete con aditivo plastificante Rheobuild en una proporción del 47%. Por su parte, el volumen de shotcrete modificado usado en los trabajos de rehabilitación, en el año 2015, resultó ser menor al volumen de shotcrete con diseño anterior, representando una disminución del 37%. Se concluyó que, al reemplazar el aditivo plastificante Rheobuild 1000 por el Hiperplastificante GLENIUM TC -1300 se obtiene una mejora en la resistencia temprana del shotcrete.

The main objective of this professional proficiency work was to obtain improvements in the design of the shotcrete using the hyperplasticizing additive Glenium TC-1300 with the purpose of reducing the volumes of shotcrete used for the rehabilitation of the maintenance of mining works. For this, early support resistance tests were carried out befare and after the modification, using a needle penetrometer and a Hilti gun. The results showed that the shotcrete design with GLENIUM TC hyperplasticizing additive achieves a 4-hour resistance higher than the shotcrete with Rheobuild plasticizing additive in a proportion of 47%. For its part, the vol u me of modified shotcrete u sed in the rehabilitation works, in 2015, turned out to be less than the volume of shotcrete with the previous design, representing a decrease of 37%. lt was concluded that, by replacing the Rheobuild 1000 plasticizer additive with the GLENIUM TC -1300 hyperplasticizer, an improvement in the early strength of the shotcrete was obtained.
Disciplina académico-profesional: Ingeniería de Minas
Institución que otorga el grado o título: Universidad Nacional de Ingeniería. Facultad de Ingeniería Geológica, Minera y Metalúrgica
Grado o título: Ingeniero de Minas
Jurado: Corimanya Mauricio, José Antonio; Chávez Valdivia, Adolfo Jesús
Fecha de registro: 27-jun-2024



Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons