Buscar en Google Scholar
Título: Autonomous control of a mobile robot with incremental deep learning neural networks
Autor(es): Glöde, Isabella
Asesor(es): Morán Cárdenas, Antonio Manuel
Campo OCDE: http://purl.org/pe-repo/ocde/ford#2.02.03
Fecha de publicación: 29-mar-2021
Institución: Pontificia Universidad Católica del Perú
Resumen: Over the last few years autonomous driving had an increasingly strong impact on the automotive industry. This created an increased need for artificial intelligence algo- rithms which allow for computers to make human-like decisions. However, a compro- mise between the computational power drawn by these algorithms and their subsequent performance must be found to fulfil production requirements. In this thesis incremental deep learning strategies are used for the control of a mobile robot such as a four wheel steering vehicle. This strategy is similar to the human approach of learning. In many small steps the vehicle learns to achieve a specific goal. The usage of incremental training leads to growing knowledge-base within the system. It also provides the opportunity to use older training achievements to improve the system, when more training data is available. To demonstrate the capabilities of such an algorithm, two different models have been formulated. First, a more simple model with counter wheel steering, and second, a more complex, nonlinear model with independent steering. These two models are trained incrementally to follow different types of trajectories. Therefore an algorithm was established to generate useful initial points. The incremental steps allow the robot to be positioned further and further away from the desired trajectory in the environ- ment. Afterwards, the effects of different trajectory types on model behaviour are investigated by over one thousand simulation runs. To do this, path planning for straight lines and circles are introduced. This work demonstrates that even simulations with simple network structures can have high performance.
Disciplina académico-profesional: Ingeniería de Control y Automatización
Institución que otorga el grado o título: Pontificia Universidad Católica del Perú. Escuela de Posgrado
Grado o título: Maestro en Ingeniería de Control y Automatización
Jurado: Reger, Johann; Morán Cárdenas, Antonio Manuel; Enciso Salas, Luis Miguel
Fecha de registro: 29-mar-2021



Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons