Look-up in Google Scholar
Title: Influencia del porcentaje de PET en la resistencia mecánica y durabilidad de adobes estabilizados elaborados con adición de cemento, Trujillo 2021
Advisor(s): Vásquez Díaz, Alberto
OCDE field: https://purl.org/pe-repo/ocde/ford#2.01.01
Issue Date: 7-Apr-2022
Institution: Universidad Privada del Norte
Abstract: La presente investigación tiene como objetivo determinar la influencia del porcentaje de PET en la resistencia a compresión y durabilidad de adobes estabilizados. Elaborándose 150 unidades con adición de 0% ,0.5%, 1%, 1.5% y 2% de fibra PET de 0.5 a 1cm, la investigación es de vital importancia para desarrollar unidades con óptimas propiedades y aplicación de nuevas alternativas constructivas. Mediante la caracterización del suelo de las muestras CM-CH de tierra y arena. Se realizó el análisis granulométrico de las muestras M1/ M2/ M3, seguido de los ensayos de contenido de humedad obteniendo un promedio de 3.6%. Se logró determinar la plasticidad 18.3, 15.70% para límites líquidos y plásticos, con índice de plasticidad de 2.6%. Así como el peso específico, el peso unitario suelto y compactado, verificando requisitos normativos mínimos. Se evaluó la resistencia a compresión en distintos periodos, el máximo valor al periodo de 7 días con resistencia a compresión de 15.12 𝐾𝑔/𝑐𝑚2, en 1% de PET. Para 14 días se obtuvo 15.86 𝐾𝑔/𝑐𝑚2 y para los 28 días se obtuvo una resistencia a 20.80 𝐾𝑔/𝑐𝑚2. La durabilidad evaluada a 2,7 y 14 días con mejores condiciones al 1% y 1.5% de incorporación de PET, influyendo positivamente el incremento de propiedades de los adobes, ante agentes como agua y condiciones medioambientales siendo de gran utilidad para futuras construcciones dentro de parámetros de normativas E 0.80_2006 y E 0.80_2017. Se comprobó la validación de valores obtenidos en el análisis estadístico para la investigación, así como el análisis económico y social demostrando que son unidades factibles, sostenibles y viables económicamente.

The present research aims to determine the influence of the percentage of PET on the compressive strength and durability of stabilized adobes made with the addition of cement. Manufacturing 150 units in an addition percentage of 0%, 0.5%, 1%, 1.5% and 2% of PET fiber, research is of vital importance to develop units with optimal properties and application of new construction alternatives. Through the characterization of the soil, the properties of the analyzed CM-CH soil and sand samples were determined. In the granulometric analysis of the M1 / M2 / M3 samples, the moisture content tests obtained an average of 3.6%. It was possible to determine the plasticity 18.3, 15.70% for liquid and plastic limits, with a plasticity index of 2.6%. As well as the specific weight, the loose and compacted unit weight, verifying minimum regulatory requirements. The compressive strength was evaluated and determined in different periods, the maximum value at the 7-day period, a compressive strength of 15.12 𝐾𝑔/𝑐𝑚2, in 1% PET. For 14 days a resistance of 15.86 𝐾𝑔/𝑐𝑚2 was obtained and for 28 days a compressive strength of 20.80 𝐾𝑔/𝑐𝑚2was obtained. For durability at 2.7 and 14 days, at 1% and 1.5% of incorporation of PET, positively influencing the increase in adobe properties, in the face of agents such as water. and environmental conditions being very useful for future constructions within the parameters of regulations E 0.80_2006 and E 0.80¬_2017. Validation of values obtained in the statistical analysis for the research, as well as the economic and social analysis, was carried out. They were shown to be feasible, sustainable and economically viable units.
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Privada del Norte. Facultad de Ingeniería
Grade or title: Ingeniero Civil
Juror: Alvarado Ruiz, Cinthya; Cornejo Rodríguez, Sheyla; Sagastegui Vasquez, German
Register date: 10-Jun-2022



This item is licensed under a Creative Commons License Creative Commons