Buscar en Google Scholar
Registro completo de metadatos
Galvez, Evelyn
Condori Acho, Jose Luis (es_PE)
Nevado Solis, Jorge Alonso (es_PE)
2024-07-30T21:58:06Z
2024-07-30T21:58:06Z
2024-06-21
http://hdl.handle.net/10757/674248
Este trabajo se centra en el análisis y diseño estructural de un edificio multifamiliar de 5 niveles ubicado en San Isidro, Lima. El edificio, con un área total de 170 m2, se encuentra en un terreno gravoso típico de la zona, con una capacidad portante de 45 tn/m2. El sistema estructural combina muros y pórticos de concreto armado para garantizar una alta resistencia y rigidez. Las losas se diseñaron de forma aligerada en una dirección y macizas en dos, según las necesidades de cada nivel. Todos los cálculos de diseño y análisis se han realizado siguiendo las normas establecidas en el Reglamento Nacional de Edificaciones (RNE). Para un análisis más profundo, se ha desarrollado un modelo tridimensional utilizando el software ETABS. Este modelo ha permitido evaluar el comportamiento estructural del edificio bajo cargas de gravedad y sísmicas, obteniendo desplazamientos y derivas máximas que se encuentran dentro de los límites permitidos. El edificio cuenta con 1 ascensor y 1 escalera que conectan el primer piso con el último nivel. El diseño estructural completo y seguro cumple con las normas vigentes y se adapta a las características específicas del terreno y la tipología del edificio.
This work focuses on the analysis and structural design of a 5-story multifamily building located in San Isidro, Lima. The building, with a total area of ​​170 m2, is located on a typical gravel land in the area, with a bearing capacity of 45 tn/m2. The structural system combines reinforced concrete walls and frames to guarantee high resistance and rigidity. The slabs were designed light in one direction and solid in two, according to the needs of each level. All design calculations and analysis have been carried out following the standards established in the National Building Regulations (RNE). For further analysis, a three-dimensional model has been developed using ETABS software. This model has made it possible to evaluate the structural behavior of the building under gravity and seismic loads, obtaining maximum displacements and drifts that are within the permitted limits. The building has 1 elevator and 1 staircase that connect the first floor to the top level. The complete and safe structural design complies with current standards and adapts to the specific characteristics of the terrain and the typology of the building.
Trabajo de Suficiencia Profesional (es_PE)
application/pdf (en_US)
application/msword (en_US)
application/epub (en_US)
spa (es_PE)
Universidad Peruana de Ciencias Aplicadas (UPC) (es_PE)
info:eu-repo/semantics/openAccess (es_PE)
http://creativecommons.org/licenses/by-nc-sa/4.0/ (*)
Universidad Peruana de Ciencias Aplicadas (UPC) (es_PE)
Repositorio Académico - UPC (es_PE)
ETABS
Análisis estructural
Diseño estructural
Structural analysis
Structural design
Diseño estructural de un edificio multifamiliar de concreto armado de 5 niveles (es_PE)
info:eu-repo/semantics/bachelorThesis (es_PE)
Universidad Peruana de Ciencias Aplicadas (UPC). Facultad de Ingeniería (es_PE)
Ingeniería Civil (es_PE)
Licenciatura (es_PE)
Ingeniero Civil (es_PE)
PE (es_PE)
https://purl.org/pe-repo/ocde/ford#2.01.01
https://purl.org/pe-repo/ocde/ford#2.00.00 (es_PE)
https://purl.org/pe-repo/renati/level#tituloProfesional (es_PE)
46287557
0000-0001-8458-3976 (es_PE)
70974032
73521002
732016 (es_PE)
Serrano Lazo, Malena Alessandra
Anza Moreau, Cesar Augusto
https://purl.org/pe-repo/renati/type#trabajoDeSuficienciaProfesional (es_PE)
Privada societaria



Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons