Citas bibligráficas
Guerrero, M., Ayala, L. (2023). Aplicación de Mantenimiento Productivo Total (TPM) y Poka Yoke en una empresa del sector gráfico para incrementar la efectividad global de los equipos (OEE) en la línea de productos publicitarios en la ciudad de Lima – Perú [Trabajo de Suficiencia Profesional, Universidad Peruana de Ciencias Aplicadas (UPC)]. http://hdl.handle.net/10757/672231
Guerrero, M., Ayala, L. Aplicación de Mantenimiento Productivo Total (TPM) y Poka Yoke en una empresa del sector gráfico para incrementar la efectividad global de los equipos (OEE) en la línea de productos publicitarios en la ciudad de Lima – Perú [Trabajo de Suficiencia Profesional]. PE: Universidad Peruana de Ciencias Aplicadas (UPC); 2023. http://hdl.handle.net/10757/672231
@misc{renati/414246,
title = "Aplicación de Mantenimiento Productivo Total (TPM) y Poka Yoke en una empresa del sector gráfico para incrementar la efectividad global de los equipos (OEE) en la línea de productos publicitarios en la ciudad de Lima – Perú",
author = "Ayala Obregon, Leyla Cleysi",
publisher = "Universidad Peruana de Ciencias Aplicadas (UPC)",
year = "2023"
}
The investigation begins with a report on the state of the printing industry to Heidelberger Druckmaschinen AG, in which print production in China was reduced by up to 80% compared to normal volumes. 2017 was not a good year for the various sectors. Regarding the graphic sector, the GDP was reduced by 12.28%. However, in 2018 there was a recovery with a GDP growth of 2.72%, showing an increase in transformation activities and an increase in domestic consumption; However, in 2019 there was a contraction to 6.46%, becoming one of the sectors most affected so far. According to the National Institute of Statistics and Informatics (INEI), the graphic sector presents an efficiency of 27%. For the diagnosis of the problem, it was identified that the main causes were: high downtime and reprocesses in manual cutting, both represent 66.33% of the total problems. On the one hand, in the first case, it is proposed to use the TPM (Preventive Maintenance) by performing diagnostic tests on the most critical machine "HP1" daily and using a control card that involves the repair time used for failure. On the other hand, in the second cause of the problem, the application of the Poka Yoke tool is sought to improve the manual cutting method of the operators. It is estimated to increase the OEE to 85%, considering that the Lean Tools are the most effective in continuous improvement projects.
Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons