Look-up in Google Scholar
Title: Aplicación del análisis dinámico tiempo historia para evaluar la influencia del refuerzo estructural en los edificios aislados de clase A sometidos a registros sísmicos con diferentes mecanismos de falla en Ica-Perú
Other Titles: Application of Dynamic Time History Analysis to evaluate the influence of structural reinforcement in isolated buildings subjected to seismic records with different failure mechanisms in ICA- PER
Advisor(s): Moreno Sánchez, Javier Daniel
OCDE field: http://purl.org/pe-repo/ocde/ford#2.00.00; https://purl.org/pe-repo/ocde/ford#2.01.01
Issue Date: 24-Oct-2022
Institution: Universidad Peruana de Ciencias Aplicadas (UPC)
Abstract: La elección de una respuesta sísmica con características únicas de sitio es fundamental para evitar un sobredimensionamiento o un diseño estructural deficiente. Por lo que, predecir un comportamiento especifico durante un evento sísmico real, es la elección óptima para prevenir el exceso de acero es los elementos estructurales. Se ha observado que al realizar estudios sísmicos se ha recolectado datos de otros países sin tener en cuenta el impacto que podría tener los registros acelerográficos por sus características geológicas o parámetros de sitio, e incluso el régimen tectónico, ni considerando que hay diferentes tipos de movimientos sísmicos. Por ende, no podemos afirmar que una falla distinta a las características propias de sitio va a generar un comportamiento sísmico similar. Por lo que, su espectro y su comportamiento respecto al periodo es distinto. Debido a ello, no podemos apoyar que una falla transformante y subducción va a generar un registro certero, adecuado y optimo la cual pueda acomodarse para un estudio sísmico de un edificio aislado. Por lo tanto, en esta investigación se estudiará la influencia que tiene el registro sísmico escalado con mecanismos de falla diferentes, y si este tiene una repercusión importante respecto al refuerzo estructural del edificio. Por consiguiente, para evaluar la influencia de los registros se consideró las características principales para un diseño, que son los desplazamientos, derivas, cortante por piso y cortante basal. A su vez, se siguió con cumplir las normas técnicas peruana sismorresistentes y del uso de los aisladores sísmicos. Para llegar a ello, se presentó un análisis de peligro sísmico considerando un mapa de microzonificación sísmica de la ciudad de Ica y se seleccionó los registros sísmicos universales más característicos tomando en cuenta su régimen tectónico. El análisis sísmico se realizó con el Método Dinámico Tiempo Historia con el software Etabs, la cual, tomo en cuenta los registros escalados en SeismoMatch.

Choosing a seismic response with unique site characteristics is critical to avoid oversizing or poor structural design. Therefore, predicting a specific behavior during a real seismic event is the optimal choice to prevent excess steel in structural elements. It has been observed that when carrying out seismic studies, data from other countries has been collected without considering the impact that accelerographic records could have due to their geological characteristics or site parameters, and even the tectonic regime, nor considering that there are different types of movements seismic. Therefore, we cannot affirm that a fault other than the characteristics of the site will generate a similar seismic behavior. Therefore, its spectrum and its behavior with respect to the period is different. Due to this, we cannot support that a transform fault and subduction will generate an accurate, adequate, and optimal record which can be accommodated for a seismic study of an isolated building. Therefore, in this research, the influence of the scaled seismic record with different failure mechanisms will be studied, and if it has an important impact on the structural reinforcement of the building. Therefore, to evaluate the influence of the logs, the main characteristics for a design were considered, which are displacements, drifts, floor shear and base shear. At the same time, the Peruvian earthquake-resistant technical standards and the use of seismic isolators continued to be complied with. To achieve this, an analysis of seismic hazard was presented considering a seismic microzoning map of the city of Ica and the most characteristic universal seismic records were selected considering their tectonic regime. The seismic analysis was carried out with the Dynamic Time History Method with the Etabs software, which considered the records scaled in SeismoMatch.
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Peruana de Ciencias Aplicadas (UPC). Facultad de ingeniería
Grade or title: Ingeniero Civil
Register date: 15-Nov-2022



This item is licensed under a Creative Commons License Creative Commons