Look-up in Google Scholar
Title: Análisis de las propiedades físico mecánicas de mezclas asfálticas con plástico reciclado para fines de pavimentación Trujillo – 2023
Advisor(s): Medina Carbajal, Lucio Sigifredo
OCDE field: http://purl.org/pe-repo/ocde/ford#2.01.00
Issue Date: 2024
Institution: Universidad Privada Antenor Orrego
Abstract: El presente estudio de investigación fue concebido en el análisis de las propiedades físico mecánicas de mezclas asfálticas con plástico reciclado para fines de pavimentación Trujillo-2023, en la cual se evaluó las propiedades físico mecánicas de los componentes de la mezcla asfáltica a través de los distintos ensayos que se aplican a estos para determinar si eran aptos para usarlos en dicho diseño, también se hicieron las mezclas asfálticas tradicionales con 4 diferentes porcentajes del 5%, 5.5% 6% y 6.5% de cemento asfáltico mientras que para el ensayo de la mezcla asfáltica modificada con plástico se hicieron ensayo con 3 porcentajes diferentes que fueron del 4.5%, 6.5% y 7.5% Siguiendo los criterios de diseño establecidos por Marshall, de esta manera se pudo determinar el porcentaje adecuado de plástico para ser añadido a la mezcla asfáltica y pueda mejorar las propiedades físico mecánicas del pavimento asfáltica, que es precisamente lo que se buscaba con esta investigación, para ello se tuvo un enfoque metodológico cuasiexperimental ya que este plan de trabajo con el que se estudió el impacto del plástico reciclado en los procesos de cambio en las propiedades físico-mecánicas del pavimento asfáltico detallando de manera descriptiva el comportamiento de los individuos y de las diferentes variables y registrar datos cualitativos y cuantitativos, para ello se hicieron pruebas a 12 briquetas de mezcla tradicional y 9 briquetas de mezcla asfáltica modificada con plástico haciendo un total de 21 briquetas que fueron sometidas al ensayo Marshall y cuyos resultados se ven reflejados en el análisis de datos, de donde podemos extraer a modo de conclusión general que la mezcla con mayor beneficio en sus propiedades fue la que se trabajó con un 6.0% de plástico añadido, optimizando la estabilidad de la mezcla asfáltica para tránsito medio y manteniendo las demás propiedades dentro de los parámetros estipulados por la Especificaciones Técnicas Generales de Construcción (EG-2018) precisadas por el MTC

The present research study was conceived in the analysis of the physical mechanical properties of asphalt mixtures with recycled plastic for paving purposes Trujillo-2023, in which the physical mechanical properties of the components of the asphalt mixture were evaluated through the different tests that are applied to these to determine if they were suitable for use in said design, traditional asphalt mixtures were also tested with 4 different percentages of 5%, 5.5%, 6% and 6.5% of asphalt cement while for the test of the mixture Asphalt modified with plastic, tests were carried out with 3 different percentages that were 4.5%, 6.5% and 7.5%. Following the design criteria established by Marshall, in this way it was possible to determine the appropriate percentage of plastic to be added to the asphalt mixture and can improve the physical-mechanical properties of the asphalt pavement, which is precisely what was sought with this research, for this a quasi-experimental methodological approach was taken since this work plan with which the impact of recycled plastic on the change processes was studied in the physical-mechanical properties of the asphalt pavement, descriptively detailing the behavior of the individuals and the different variables and recording qualitative and quantitative data, for this, tests were carried out on 12 briquettes of traditional mixture and 9 briquettes of asphalt mixture modified with plastic making a total of 21 briquettes that were subjected to the Marshall test and whose results are reflected in the data analysis, from which we can draw a general conclusion that the mixture with the greatest benefit in its properties was the one that was worked with a 6.0 % of plastic added, optimizing the stability of the asphalt mixture for medium traffic and maintaining the other properties within the parameters stipulated by the General Technical Construction Specifications (EG-2018) specified by the MTC
Discipline: Ingenieria Civil
Grade or title grantor: Universidad Privada Antenor Orrego. Facultad de Ingenieria
Grade or title: Ingeniero Civil
Juror: Gálvez Paredes, José Alcides.; Farfán Córdova, Marlon Gastón; Merino Martinez, Marcelo Edmundo.
Register date: 20-Jun-2024



This item is licensed under a Creative Commons License Creative Commons