Buscar en Google Scholar
Título: Propuesta del sistema abastecimiento de agua potable para el distrito de Santiago de Chuco - La Libertad
Asesor(es): Cabanillas Quiroz, Guillermo Juan
Palabras clave: ContaminaciónConducción
Campo OCDE: http://purl.org/pe-repo/ocde/ford#2.01.00
Fecha de publicación: 2022
Institución: Universidad Privada Antenor Orrego.
Resumen: La presente investigación nace con las enfermedades hídricas a causa de la conducción de agua a través de un canal de concreto a cielo abierto. Durante el transporte del fluido se expone a contaminación por parte del hombre y la naturaleza. La finalidad es el mejorar el sistema de abastecimiento de agua para la ciudad de Santiago de Chuco. A través del levantamiento topográfico por Google Earth se obtuvieron las curvas de nivel. Con programas como: Excel, AutoCAD Civil 3D, Qgis y WaterCAD se realizo el diseño de la línea de conducción, aducción y la red de distribución de agua. Se determino que por la topografía es necesario el diseño de 2 reservorios, la cantidad de habitantes a satisfacer son 9048, para la línea de conducción se necesitara una tubería de 6” y para las líneas de aducción de 4” y 6” respectivamente. Con respecto a los análisis de suelos se encontró predominante el limo arcilloso (CL) respecto al sistema SUCS y ASHHTO, con capacidad portante de 2.34 kg/cm2.

This research is born with water diseases due to the conduction of water through an open-air concrete channel. During the transport of the fluid it is exposed to contamination by man and nature. The purpose is to improve the water supply system for the city of Santiago de Chuco. Through the topographic survey by Google Earth, the contour lines were obtained. Programs such as: Excel, AutoCAD Civil 3D, Qgis and WaterCAD, the design of the conduction line, adduction and the water distribution network was carried out. It was determined that by the topography it is necessary to design 2 reservoirs, the number of inhabitants to be satisfied are 9048, for the conduction line a 6““ pipe will be needed and for the 4““ and 6““ adduction lines respectively. With respect to soil analysis, clay silt (CL) was found to be predominant over the SUCS and ASHHTO system, with a bearing capacity of 2.34 kg/cm2.
Disciplina académico-profesional: Ingeniería Civil
Institución que otorga el grado o título: Universidad Privada Antenor Orrego. Facultad de Ingeniería
Grado o título: Ingeniero Civil
Jurado: Ramal Montejo, Rodolfo; Narváez Aranda, Ricardo; Perrigo Sarmiento, Félix
Fecha de registro: 27-jun-2022



Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons