Look-up in Google Scholar
Title: Determinación del comportamiento estructural del perfil en I elaborado de fibra de madera de densidad media (MDF) y fibra de vidrio aplicado a un invernadero de Camposol
Advisor(s): Urteaga García, Juan Manuel
OCDE field: http://purl.org/pe-repo/ocde/ford#2.01.00
Issue Date: 2021
Institution: Universidad Privada Antenor Orrego
Abstract: Se identificó un error muy común, el cual fue intentar solucionar la presencia de salitre de manera superficial en las edificaciones, siendo lo correcto solucionar el problema desde el interior de la estructura para asegurar la duración de la edificación. Este problema también se identificó en estructuras metálicas o de maderas en los cuales no es muy fácil de percatarse, a pesar de traer graves problemas para la salud. Considerando estas agresivas las condiciones atmosféricas e hidrográficas presentes en la costa del Perú, proponemos remplazar estructuras livianas tradicionalmente construidas de acero. El trabajo tuvo como propósito obtener un nuevo perfil en I elaborado con fibra de madera de densidad media (MDF) cubierta de fibra de vidrio, y determinar las propiedades físicas y geométricas de la sección del perfil que resistan a un alto nivel de humedad. Se elaboró el ensayo de flexión en el laboratorio de la Universidad Privada Antenor Orrego, haciendo uso de la máquina Universal, para determinar los diagramas de esfuerzo vs deformación de las muestras de MDF de 3mm, 4mm, 5.5mm y la resina de fibra de vidrio, para obtener el módulo de elasticidad, la resistencia a la fluencia, el módulo de resiliencia, el coeficiente de poisson, el esfuerzo último, la ductilidad, la tenacidad, el esfuerzo al límite proporcional elástico y el esfuerzo de rotura. Se elaboró el diseño del perfil de MDF con fibra de vidrio, determinando la máxima tensión normal, la máxima tensión tangencial y la combinación de ambas tensiones, logrando que sean menor al esfuerzo admisible, para que según la normativa cumplan y puedan reemplazar al perfil metálico, que se viene utilizando en el invernadero de empresa agroindustrial Camposol

A very common error was identified, which was to try to solve the presence of saltpeter in a superficial way in the buildings, being the correct thing to solve the problem from inside the structure to ensure the duration of the building. This problem was also identified in metal or wooden structures in which it is not very easy to notice, despite causing serious health problems. Considering the great aggressiveness of the atmospheric and hydrographic conditions present on the Peruvian coast, we propose a material to replace light structures traditionally built with steel. The purpose of the work was to obtain a new profile in form of “I”, made with medium density wood fiber (MDF) and fiberglass, and to determine the physical and geometric properties of the profile section that resist a high level of humidity. The bending test was developed in Antenor Orrego Private University’s laboratory, using the the Universal Machine to determine the stress vs deformation diagram from MDF samples of the 3mm, 4mm and 5.5mm and fiberglass resin to obtain the elasticity modulus, the yield strength, modulus of resilience, poison’s ratio, ultimate stress, ductility, toughness, stress at yield point, and breaking stress. The design of the MDF profile with fiberglass was elaborated, determining the maximum normal stress, the maximum tangential stress and the combination of both stresses, making them less than the admissible stress, so that according to the regulations they comply with and can replace the metal profile, which has been used in the greenhouse of the Camposol agro-industrial company
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Privada Antenor Orrego. Facultad de Ingeniería
Grade or title: Ingeniero Civil
Juror: Alanoca Quenta, Ángel Fredy; Moran Guerrero, Victor Manuel; Vega Benites, Jorge Antonio
Register date: 10-Aug-2021



This item is licensed under a Creative Commons License Creative Commons