Citas bibligráficas
Diaz, D., (2024). Análisis de la calidad del mortero utilizando como componentes el concreto reciclado y nanosílice en las construcciones de albañilería [Universidad Católica Santo Toribio de Mogrovejo]. http://hdl.handle.net/20.500.12423/8047
Diaz, D., Análisis de la calidad del mortero utilizando como componentes el concreto reciclado y nanosílice en las construcciones de albañilería []. PE: Universidad Católica Santo Toribio de Mogrovejo; 2024. http://hdl.handle.net/20.500.12423/8047
@misc{renati/1107079,
title = "Análisis de la calidad del mortero utilizando como componentes el concreto reciclado y nanosílice en las construcciones de albañilería",
author = "Diaz Herrera, Drayslly Marylin",
publisher = "Universidad Católica Santo Toribio de Mogrovejo",
year = "2024"
}
In the present research entitled Analysis of the quality of the mortar using recycled concrete and nanosilica as components in masonry constructions, the general objective is to analyze the mortar with the incorporation of the mentioned components. The study was carried out with the following methodology, having as a first step the preparations of a pattern mortar and a mortar with replacement of 30% of the sand with CR and addition of NS in three percentages, subsequently comparing their results obtained from the tests of the physical and mechanical properties. The commercial brick that was used for the tests belongs to type IV. In the compressive strength and adhesion test, the best result was achieved with a CR30% and NS1% mortar, reaching the value of 191.91kg/cm2 and 6.75k g/cm2 respectively. It was concluded that by increasing the percentage of nanosilica, the percentage of fluidity and resistance of the mortar also increases.
Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons