Citas bibligráficas
Gonzales, J., Huansi, A. (2022). Influencia de las consistencias del concreto cemento - arena sobre las propiedades en estado fresco y endurecido, distrito de San Juan Bautista, Iquitos 2020 [Tesis, Universidad Científica del Perú]. http://hdl.handle.net/20.500.14503/1900
Gonzales, J., Huansi, A. Influencia de las consistencias del concreto cemento - arena sobre las propiedades en estado fresco y endurecido, distrito de San Juan Bautista, Iquitos 2020 [Tesis]. PE: Universidad Científica del Perú; 2022. http://hdl.handle.net/20.500.14503/1900
@misc{renati/1036566,
title = "Influencia de las consistencias del concreto cemento - arena sobre las propiedades en estado fresco y endurecido, distrito de San Juan Bautista, Iquitos 2020",
author = "Huansi Panduro, Alcides Telesphoro",
publisher = "Universidad Científica del Perú",
year = "2022"
}
The objective of this research was to determine the "Influence of the consistencies of cement-sand concrete on the properties in fresh state and hardened, district of San Juan Bautista, Iquitos 2020”, likewise, through the design of three samples the differences that are generated in the properties were seen of fresh and hardened concrete. To achieve the objectives, the use of a single “a/c” ratio and three consistencies, dry, plastic and fluid, based mainly on the state fresh and therefore in the hardened state. Through the use of different consistencies were determined, analyzed and differentiated the properties that were generate cement in the concrete. The results of the tests confirm that the consistencies of the concrete cement-sand if they influence the properties in fresh and hardened state,they also show compatibility with the specifications of the type of cement used, cement Type I(PM): Modified pozzolanic Portland cement, that is, the mixtures offer docility and easy accommodation in the test tubes, understanding that the characteristics of the aggregate have great collaboration to achieve these effects. Demonstrating through tests that the properties meet the standards established techniques NTP 334.009 and ASTM C496 / C496M-11.
Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons