Look-up in Google Scholar
Title: Propiedades físicas y mecánicas de ladrillos de concreto con la incorporación de PET en diferentes porcentajes
Advisor(s): Mosqueira Moreno, Miguel Ángel
OCDE field: https://purl.org/pe-repo/ocde/ford#2.01.01
Issue Date: 26-May-2017
Institution: Universidad Privada del Norte
Abstract: RESUMEN En la presente investigación se comparó las propiedades físicas y mecánicas de un ladrillo de concreto convencional con ladrillos de concreto con la incorporación de PET (polietileno tereftalato) al 5%, 10% y 15% de la dosificación para un ladrillo tipo V según la norma E.070 de albañilería (2006). En la cual se compararon las propiedades de: Variación dimensional, alabeo, resistencia a compresión, resistencia a tracción por flexión, absorción y succión. Para poder identificar si dichas propiedades mejoran o disminuyen respecto al ladrillo patrón que es con 0% de PET. Lográndose como resultados que en variación dimensional ningún ladrillo cumple con las dimensiones indicadas por el fabricante puesto que los ladrillos de 0% tienen una variación de (L= -1.23%, A= -0.69% y H= -1.17%), los ladrillos con 5% de PET tienen una variación de (L= -1.24%, A= -0.56% y H= -1.00%), los ladrillos con 10% de PET tienen una variación de (L= -1.34%, A= 0.69% y H= -1.37%), mientras los ladrillos con 15% de PET tienen una variación de (L= -1.24%, A= -0.41% y H= -1.08%). En lo que corresponde a alabeo se obtuvo que todos los ladrillos clasifican para un ladrillo tipo V y una variación de convexidad y concavidad menor a 2mm. En lo que corresponde a resistencia a compresión los ladrillos con incorporación al 5%, 10% y 15% de PET disminuyen su resistencia en 4.47%, 9.29% y 20.04% respectivamente. En lo correspondiente a resistencia a tracción por flexión los ladrillos con incorporación de PET al 0%, 5%, 10% y 15% alcanzaron una resistencia respecto a su resistencia de compresión del 63.28%, 72.03%, 67.22% y 62.76% respectivamente. Mientras que la absorción de los ladrillos con incorporación de PET al 0%, 5%, 10% y 15% fue de 4.51%, 3.89%, 3.36% y 2.97% respectivamente. Finalmente la succión de los ladrillos de concreto con incorporación de PET al 0%, 5%, 10% y 15% es de 9.17 gr/200/ , 8.20 gr/200 / , 8.06 gr/200/ min, y 15% 7.47 gr/200 / .

ABSTRACT In the present research the physical and mechanical properties of a conventional concrete brick with concrete bricks were compared with the incorporation of PET (polyethylene terephthalate) at 5%, 10% and 15% of the dosage for a type V brick according to E.070 Masonry (2006). In which the properties of: Dimensional variation, warpage, compressive strength, flexural tensile strength, absorption and suction were compared. In order to identify if these properties improve or decrease with respect to the standard brick that is with 0% of PET. The results show that in dimensional variation no brick meets the dimensions indicated by the manufacturer since the 0% bricks have a variation of (L = -1.23%, A = -0.69% and H = -1.17%), bricks With 5% PET having a variation of (L =-1.24%, A = -0.56% and H = -1.00%), the bricks with 10% PET have a variation of (L = -1.34%, A = 0.69 % And H = -1.37%), while the bricks with 15% PET have a variation of (L = -1.24%, A = -0.41% and H = -1.08%). In what corresponds to warping it was obtained that all the bricks classified for a brick type V and a variation of convexity and concavity smaller than 2mm. In terms of compressive strength, bricks with 5%, 10% and 15% incorporation of PET decrease their resistance by 4.47%, 9.29% and 20.04%, respectively. As regards flexural tensile strength, the bricks with 0%, 5%, 10% and 15% PET incorporation achieved a resistance to their compressive strength of 63.28%, 72.03%, 67.22% and 62.76%, respectively. While the absorption of the bricks with incorporation of PET at 0%, 5%, 10% and 15% was of 4.51%, 3.89%, 3.36% and 2.97% respectively. Finally the suction of the concrete bricks with incorporation of PET at 0%, 5%, 10% and 15% is 9.17 gr/200 / , 8.20 gr/200 / , 8.06 gr/200 / and 15% 7.47 gr/200 / .
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Privada del Norte. Facultad de Ingeniería
Grade or title: Ingeniero Civil
Register date: 31-Oct-2017



This item is licensed under a Creative Commons License Creative Commons