Look-up in Google Scholar
Full metadata record
Salazar Huamán, Erlyn Giordany
Acuña Paisig, Jesus Orlando
2022-12-12T22:51:07Z
2022-12-12T22:51:07Z
2022-07-21
Acuña, J. O. (2022). Propuestas de maniobras con maquinaria pesada para optimizar el movimiento de tierras en Carachugo 2022 [Tesis de licenciatura, Universidad Privada del Norte]. Repositorio de la Universidad Privada del Norte. https://hdl.handle.net/11537/32040 (es_PE)
690.0284 ACUÑ 2022 (es_PE)
https://hdl.handle.net/11537/32040
La presente tesis se desarrolló en la Minera Yanacocha en la zona denominada CARACHUGO 14 en Cajamarca, Perú, con el objetivo general proponer maniobras con maquinaria para optimizar el movimiento de tierras en Carachugo 2022. Así mismo comparar estas maniobras de equipo pesado con las maniobras teóricos. Para la realización de este proyecto se recopiló información entre los meses de julio y septiembre del 2021, mediante observación directa, medición y registro en formatos de reporte diario y de control de equipos. La funcionalidad de la maquinaria pesada que se detalla en esta investigación enfocada de acuerdo al tipo de material involucrado, nombrando las limitaciones y las características que inciden en la elección de ella, según sean las propiedades del suelo en que se trabaja. Como uno de los objetivos específicos de la investigación es optimizar el movimiento de tierras, usando maquinaria pesada, para las actividades de carguío con EXCAVADORA CAT 336DL con capacidad de 2.5 m3, empuje TRACTOR CAT D6T XL con capacidad de empuje de 1200m3/h y acarreo con VOLQUETE VOLVO 15 m3. Las maniobras reales obtenidos serán comparados con las maniobras dados por el fabricante, identificando factores adversos propios de un proyecto minero como son: clima, fallas mecánicas y operador. De dicha comparación se ha logrado determinar que las maniobras reales son menores a los indicados por el fabricante; así tenemos que la maniobra teórico para la excavadora CAT 336DL es de 450.00 m3/hora, y su maniobra real con horas efectivas es de 298.48 m3/hora, para el tractor CAT D6T XL su maniobra teórica es de 552 m3/h y su maniobra real con horas efectivas es de 421.87 m3/hora; finalmente para el volquete su maniobra teórica a una distancia de 2.60 km es de 90.28 m3/h y su maniobra real en ciclo promedio/min es de 13.47%. (es_PE)
This thesis project was developed at Minera Yanacocha in the area called CARACHUGO 14 in Cajamarca, Peru, with the general objective of evaluating the performance of heavy machinery for the construction project of PAD CARACHUGO 14. Also compare these heavy equipment performances with the theoretical performances. In order to carry out this project, information was collected between the months of July and September 2021, through direct observation, measurement and recording in daily report and equipment control formats. The functionality of the heavy machinery that is detailed in this project is focused according to the type of material involved, naming the limitations and characteristics that affect the choice of it, depending on the properties of the soil in which it is worked. As one of the specific objectives of the research is to optimize real performance in earthworks, using heavy machinery, for loading activities with CAT 336DL EXCAVATOR with 2.5 m3 capacity, CAT D6T XL TRACTOR with a push capacity it is 1200 m3/h, and 15 m3 VOLVO TIPPER. The real yields obtained will be compared with the yields given by the manufacturer, identifying adverse factors typical of a mining project such as: weather, mechanical failures and operator. From this comparison it has been possible to determine that the real yields are lower than those indicated by the manufacturer; thus we have that the theoretical performance for the CAT 336DL excavator is 450.00 m3 / hour, and its real performance with effective hours is 298.48 m3 / hour, for the CAT D6T XL tractor its theoretical performance is 552 m3 / h and its actual performance with effective hours it is 421.87 m3 / hour; finally for the tipper the theoretical performance at a distance of 2.60 km is 90.28 m3 / h and its real performance in average cycle / min is 13.47%. (es_PE)
Tesis (es_PE)
application/pdf (es_PE)
application/msword (es_PE)
spa (es_PE)
Universidad Privada del Norte (es_PE)
info:eu-repo/semantics/embargoedAccess (es_PE)
Universidad Privada del Norte (es_PE)
Repositorio Institucional - UPN (es_PE)
Maquinaria de construcción (es_PE)
Máquinas para el movimiento de tierras (es_PE)
Excavadoras (es_PE)
Maniobra (es_PE)
Maquinaria pesada (es_PE)
Ejecución (es_PE)
Actividad (es_PE)
Maneuver (es_PE)
Heavy machinery (es_PE)
Execution (es_PE)
Activity (es_PE)
Propuestas de maniobras con maquinaria pesada para optimizar el movimiento de tierras en Carachugo 2022 (es_PE)
info:eu-repo/semantics/bachelorThesis (es_PE)
Universidad Privada del Norte. Facultad de Ingeniería (es_PE)
Ingeniería Civil (es_PE)
Título Profesional (es_PE)
Ingeniero Civil (es_PE)
PE (es_PE)
https://purl.org/pe-repo/ocde/ford#2.01.01 (es_PE)
Pregrado (es_PE)
http://purl.org/pe-repo/renati/level#tituloProfesional (es_PE)
71106769
https://orcid.org/0000-0001-7619-7995 (es_PE)
42865176
732016 (es_PE)
Núñez Vásquez, Kely Elizabeth
Calua Carrasco, Carlos Elder Rudecindo
Velásquez Huayta, Felix Alejandra
http://purl.org/pe-repo/renati/type#tesis (es_PE)
Privada societaria



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.