Look-up in Google Scholar
Title: Influencia del uso de residuos de construcción y demolición en diferentes porcentajes sobre la resistencia a la compresión del concreto, Trujillo 2018
Advisor(s): Azañedo Medina, Wiston Henry
OCDE field: https://purl.org/pe-repo/ocde/ford#2.01.01
Issue Date: 12-Oct-2018
Institution: Universidad Privada del Norte
Abstract: La presente investigación tiene el objetivo de describir la influencia del uso de residuos de construcción y demolición (RCD), procedentes del sector de la construcción en la ciudad de Trujillo, en diferentes porcentajes sobre la resistencia a la compresión del concreto, diseñando una mezcla de concreto f’c=175 kg/cm2 a partir del método ACI. Para obtener la resistencia a la compresión, se elaboraron probetas cilíndricas de 15 cm de diámetro y 30 cm de altura, las cuales se conformaron considerando una dosificación de 0%, 5%, 10% y 15% de uso de RCD, las cuales se ensayaron a la edad de 28 días. Como resultado se obtuvo: para el Concreto Patrón se obtiene una resistencia promedio de 203.28 kg/cm2, para el concreto con 5% de uso de RCD se obtiene 196.39 kg/cm2, para el concreto con 10% de uso de RCD se obtiene 189.82 kg/cm2 y para el concreto con 15% de uso de RCD se obtiene 183.01 kg/cm2. Esto demuestra que usando valores menores a 15% de RCD, la resistencia a lo compresión se deteriora en un porcentaje mínimo, sin estar por debajo de la resistencia de diseño, lo cual demuestra que la utilización de este material es viable en la elaboración de concreto.

The present investigation has the objective of describing the influence of the use of construction and demolition waste (RCD), coming from the construction sector in the city of Trujillo, in different percentages on the compressive strength of the concrete, designing a mixture of concrete f'c = 175 kg / cm2 from the ACI method. To obtain the compressive strength, cylindrical specimens of 15 cm in diameter and 30 cm in height were prepared, which were formed considering a dosage of 0%, 5%, 10% and 15% of the use of RCD, which they rehearsed at the age of 28 days. As a result it was obtained: for the Concrete Standard an average resistance of 203.28 kg / cm2 is obtained, for the concrete with 5% of use of RCD 196.39 kg / cm2 is obtained, for the concrete with 10% of use of RCD it is obtained 189.82 kg / cm2 and for concrete with 15% use of RCD, 183.01 kg / cm2 is obtained. This shows that using values lower than 15% of RCD, the resistance to compression deteriorates in a minimum percentage, without being below the design resistance, which shows that the use of this material is viable in the manufacture of concrete.
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Privada del Norte. Facultad de Ingeniería
Grade or title: Ingeniero Civil
Register date: 3-Dec-2018



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.