Look-up in Google Scholar
Title: Influencia de tipos de incorporador de aire sobre el asentamiento, aire total, absorción, peso unitario y compresión del concreto a bajas temperaturas
Advisor(s): Vasquez Alfaro, Iván Eugenio
Issue Date: Apr-2019
Institution: Universidad Nacional de Trujillo
Abstract: En la actualidad se sabe que los ciclos de hielo y deshielo que ocurren en regiones con temperaturas inferiores a 5 °C afectan considerablemente la estructura interna del concreto manifestándose en agrietamiento y fisuras en su superficie. Ante esto se viene mejorando el concreto con la incorporación de una constelación de esferas de aire que reducen la perdida de resistencia frente a estos ciclos y aumentan el tiempo de vida útil de la estructura del concreto. En la presente investigación se evalúa la influencia del incorporador de aire en el concreto sometido a ciclos de hielo y deshielo con los aditivos Air Mix 200 y SikaAer, sobre el asentamiento, aire total, absorción, peso unitario y compresión del concreto. El propósito de la investigación fue determinar el óptimo porcentaje de incorporador de aire de cada marca para reducir la pérdida de resistencia en el concreto frente al congelamiento, para esto establecimos porcentajes de aditivo del 0% (patrón), 0.04%, 0.08%, 0.12%, 0.16%, 0.20%, 0.24% y 0.28%. Se utilizó cemento Pacasmayo tipo I, agregado fino con un módulo de finura de 2.6 y agregado grueso de un tamaño máximo nominal de 1/2". Para el conformado y el ensayo de compresión del concreto se utilizaron probetas cilíndricas de 10 x 20 cm según la norma ASTM C39, para el asentamiento se usó la norma ASTM C134, para el contenido de aire la norma ASTM C173, para el peso unitario y la absorción la norma ASTM C642. Las probetas fueron ensayadas a una edad 3, 7 y 28 días, estas se sometieron a ciclos de congelamiento y deshielo, para lo cual se necesitó simular estos ciclos en un congelador a una temperatura entre -10 °C y -15 °C donde se colocaron las probetas diariamente por un periodo de 12 horas y la simulación del deshielo se usó la poza de curado a una temperatura de 20°C donde se colocaron las probetas las otras 12 horas diarias restantes. El diseño óptimo del concreto sometido a ciclos de congelamiento y deshielo se logró con un porcentaje de 0.04% para ambas marcas del aditivo incorporador de aire. Para el Air Mix 200 y SikaAer se obtienen las pérdidas de resistencia más bajas de 12% y 10% respectivamente, en comparación con las muestras sin adición que pierden un 19% resistencia; un asentamiento de 3 1/8” para ambas marcas; un contenido de aire de 2.6% y 2.8%; con una capacidad de absorción de 3.1% y 3.2% y un peso unitario de 2278 y 2273 kg/m3 respectivamente.
Note: It is now known that the cycles of ice and thaw that occur in regions with temperatures below 5 °C considerably affect the internal structure of the concrete, showing cracking and cracking on its surface. Before this, concrete is being improved with the incorporation of a constellation of air spheres that reduce the loss of resistance against these cycles and increase the useful life of the concrete structure. In the present investigation the influence of the air incorporator in the concrete subject to cycles of ice and thaw with the Air Mix 200 and SikaAer additives, on the settlement, total air, absorption, unit weight and compression of the concrete is evaluated. The purpose of the research was to determine the optimum percentage of air incorporator of each brand to reduce the loss of strength in concrete against freezing, for this we established percentages of additive 0% (standard), 0.04%, 0.08%, 0.12 %, 0.16%, 0.20%, 0.24% and 0.28%. Pacasmayo type I cement was used, fine aggregate with a modulus of fineness of 2.6 and coarse aggregate of a maximum nominal size of 1/2". For the forming and the compression test of the concrete cylindrical test pieces of 10 x 20 cm according to the ASTM C39 standard were used, for the settlement the ASTM C134 standard was used, for the air content the ASTM C173 standard, for the unit weight and Absorption is ASTM C642 standard. The specimens were tested at an age of 3, 7 and 28 days, these were subjected to freeze and thaw cycles, for this it was necessary to simulate these cycles in a freezer at a temperature between -10 °C and -15 °C where the test specimens were placed daily for a period of 12 hours and the simulation of the thaw was used to curing pond at a temperature of 20 ° C where the test specimens were placed for the remaining 12 hours a day. The optimal design of concrete subjected to freeze and thaw cycles was achieved with a percentage of 0.04% for both brands of the air-entraining additive. For the Air Mix 200 and SikaAer the lowest resistance losses of 12% and 10% respectively are obtained, compared to the samples without addition that lose 19% resistance; a 3 1/8 "slump for both brands; an air content of 2.6% and 2.8%; with an absorption capacity of 3.1% and 3.2% and a unit weight of 2278 and 2273 kg/m3 respectively
Discipline: Ingeniería
Grade or title grantor: Universidad Nacional de Trujillo Facultad de Ingeniería
Grade or title: Ingeniero Civil
Register date: 16-Jul-2019



This item is licensed under a Creative Commons License Creative Commons