Look-up in Google Scholar
Title: Influencia de la temperatura y tiempo de cristalización en la obtención de zeolitas a partir de cenizas volantes mediante fusión alcalina, para remover plomo y cadmio de soluciones ideales
Advisor(s): Mendoza Bobadilla, Jorge Luis
Issue Date: 2018
Institution: Universidad Nacional de Trujillo
Abstract: En el presente trabajo se encontró las condiciones óptimas del proceso cristalización de zeolitas artificiales (ZA), elaboradas a partir las cenizas volantes, como medios capaces de adsorber cationes de metales pesados en soluciones ideales de cadmio y plomo. Las cenizas volantes (CV), fueron calcinadas en un tratamiento térmico a 600ºC por 3 horas de contacto, de esta forma se obtuvo la ceniza volante calcinada (CV.CAL). Se preparó un mezcla de NaOH y CV.CAL, usando una proporción en masa según investigaciones corroboradas anteriormente de NaOH/CV.CAL = 1,6/1, para la síntesis de material zeolítico a través del método de la fusión alcalina, esta se hizo a 650ºC durante 1 hora con un posterior enfriamiento rápido. Esta investigación evaluó las mejores condiciones del proceso de cristalización, tomando como variables de estudio, el tiempo de cristalización (60, 240 y 420 min) y la temperatura de cristalización (30, 60 y 90 °C), generando 9 tratamientos de estudio. Como soluciones ideales de metales pesados, para la extracción, se usó, una de cadmio [100 mg/L] y plomo [100 mg/L], ambas fueran llevadas a pH = 4.5 para el proceso de lixiviación. Se encontró que las zeolitas artificiales generadas a una temperatura de cristalización de 60°C (ZA-60), obtuvo los mejores resultados a través de los 3 niveles de tiempo de cristalización, con 2 g de ZA-60, cristalizadas durante 240 minutos, se logró remover el 99,85% de cadmio en 50 mL de su solución, mientras que 2,0 g de ZA-60, cristalizadas a 420 minutos, logró el 99,96 % del plomo contenido en 50 mL de su solución. Así mismo, los porcentajes de remoción para los otros tratamientos respecto a cadmio y plomo, varían entre [84.87%-99.85%] y [99,61%-99,96%], respectivamente; por lo tanto, el proceso de cristalización presentó un aumento representativo del 50 % sobre la remoción de cadmio, según los resultados de los blancos
Note: In the present research, the optimal conditions of the crystallization process of artificial zeolites (ZA), elaborated from the fly ash, are sought as means capable of adsorbing heavy metal cations in ideal solutions of Cadmium and Lead. The fly ash (CV) was calcined in a heat treatment at 600ºC for 3 contact hours, in this way the calcined fly ash (CV.CAL) was obtained. A mixture of NaOH and CV.CAL was prepared, using a mass ratio according to previously corroborated investigations of NaOH / CV.CAL = 1.6 / 1, for the synthesis of zeolitic material through the alkaline fusion method, this is made at 650 ° C for 1 hour with subsequent rapid cooling. This investigation evaluated the best conditions of the crystallization process, taking as study variables, the crystallization time (60, 240 and 420 min) and the crystallization temperature (30, 60 and 90 ° C), generating 9 study treatments. As ideal solutions of heavy metals, for extraction, one of Cadmium [100 mg / L] and Lead [100 mg / L] was used, both were brought to pH = 4.5 for the leaching process. It was found that the artificial zeolites generated at a crystallization temperature of 60 ° C (ZA-60), obtained the best results through the 3 crystallization time levels, with 2 g of ZA-60, crystallized during 240 minutes, It was possible to remove 99.85% of Cadmium in 50 mL of its solution, while 2.0 g of ZA-60, crystallized at 420 minutes, achieved 99.96% of the Lead contained in 50 mL of its solution. Likewise, the percentages of removal for the other treatments with respect to cadmium and lead, vary between [84.87% -99.85%] and [99.61% -99.96%], respectively; however, the crystallization process showed a representative increase of 50% over the removal of cadmium, according to the results of the targets
Discipline: Ingeniería Ambiental
Grade or title grantor: Universidad Nacional de Trujillo. Facultad de Ingeniería Química
Grade or title: Ingeniero Ambiental
Register date: 14-Feb-2019



This item is licensed under a Creative Commons License Creative Commons