Look-up in Google Scholar
Full metadata record
Azabache Vasquez, Eduardo Fausto
Perez Rodriguez, Carlos Manuel
7/26/2019 10:22
7/26/2019 10:22
2019-07
https://hdl.handle.net/20.500.14414/13231
In the Province of Lima the process of washing jeans is a fundamental part of the textile industry but is affected due to the lack of machinery dedicated to the washing of jeans, perhaps due to ignorance or lack of budget, this leads to greater time of processing and greater consumption of water in the wash, increasing in this way the production costs. The main objective of this thesis project is the design and manufacture of an Industrial Washing Machine of the vertical type of 10 Hp of power, front loading and unloading. It begins with the mathematical and computational calculation of the design parameters that will characterize the machine. They present a drum of 1500 mm in diameter, a shell or shell of 1552 mm in diameter, an axis of 110 mm in diameter, etc. After the selection of the calculated design parameters is made, it is passed to the manufacturing stage, where the characteristics of the materials used, the different machining processes, welding, as well as the method used to manufacture the different elements of the machine are detailed that we present. Once the machine was manufactured, we went to the demonstration stage and established that the production time is much more efficient and healthy. (es_PE)
En la Provincia de lima el proceso de lavado de jeans es parte fundamental de la industria textil pero se encuentra afectada debido a la carencia de maquinaria dedicada al lavado de jeans, tal vez por desconocimiento o por falta de presupuesto, esto con lleva a mayor tiempo de procesamiento y mayor consumo de agua en el lavado, aumentando de esta manera los costos de producción. El principal objetivo de este proyecto de tesis es el diseño y fabricación de una Lavadora Industrial del tipo vertical de 10 Hp de potencia, carga y descarga frontal. Se empieza con el cálculo matemático y computacional de los parámetros de diseño que caracterizarán a la máquina. Se presentan un tambor de 1500 mm de diámetro, un envolvente o carcasa de 1552 mm de diámetro, un eje de 110 mm de diámetro, etc. Luego de realizada la selección de los parámetros de diseño calculados se pasa a la etapa de fabricación, donde se detallan las características de los materiales empleados, los diferentes procesos de mecanizado, soldadura, así como el método empleado para fabricar los diferentes elementos de la máquina que presentamos. Fabricada la maquina pasamos a la etapa demostrativa y dejamos establecido que el tiempo de producción es mucho más eficiente y saludable. (es_PE)
Tesis (es_PE)
spa (es_PE)
Universidad Nacional de Trujillo (es_PE)
Tmec;Tmec
info:eu-repo/semantics/openAccess (es_PE)
http://creativecommons.org/licenses/by-nc-nd/2.5/pe/ (es_PE)
Universidad Nacional de Trujillo (es_PE)
Repositorio institucional - UNITRU (es_PE)
Industria Textil (es_PE)
Diseño y fabricación de una lavadora industrial para el proceso de lavado de jeans en planta Textil Modipsa (es_PE)
info:eu-repo/semantics/bachelorThesis (es_PE)
Universidad Nacional de Trujillo Facultad de Ingeniería (es_PE)
Ingeniería (es_PE)
Título Profesional (es_PE)
Ingeniero Mecánico (es_PE)
Pública



This item is licensed under a Creative Commons License Creative Commons