Look-up in Google Scholar
Title: Calificación de un baño maría en el área de control de calidad de un laboratorio farmacéutico Piura-2018
Advisor(s): Castillo Saavedra, Ericson Félix
Issue Date: 2019
Institution: Universidad Nacional de Trujillo
Abstract: El objetivo del presente trabajo de prácticas preprofesionales fue calificar un baño maría en el área de control de calidad de un laboratorio farmacéutico Piura-2018, para lo cual se empleó la metodología descriptiva y observacional. La calificación se realizó en tres etapas: instalación, operación y desempeño. En la calificación de instalación se verificaron las características y las condiciones físicas del ambiente en el cual opera el equipo. Por otro lado, en la calificación de operación se verificaron las condiciones preliminares para el funcionamiento del equipo y se realizaron tres estudios de distribución de calor del medio isotermo (baño maría) sin carga, y finalmente para la calificación de desempeño se realizaron estudios de distribución de calor del medio isotermo con carga, para alcanzar el logro de las temperaturas de ensayo de 60ºC ± 2 y 99ºC ± 2, se configuro el controlador de temperatura del equipo a 58ºC y 96,5ºC respectivamente. En cada una de estas tres etapas se encontraron resultados favorables, lo cual permite concluir que el equipo baño maría destinado al calentamiento homogéneo por convección térmica del agua, de acuerdo con las necesidades del usuario en el área de control de calidad de un laboratorio farmacéutico nacional está calificado
Note: The objective of the present work of preprofessional practices was to qualify a water bath in the quality control area of a pharmaceutical laboratory Piura-2018, for which the descriptive and observational methodology was used. The work was carried out in three stages: installation, operation and performance. In the installation qualification, the characteristics and physical conditions of the environment in which the equipment operates were verified. On the other hand, in the operation qualification, the preliminary conditions for the operation of the equipment were verified and three heat distribution studies of the isothermal medium without load were carried out, and finally for the qualification of performance, heat distribution studies of the medium were carried out. isotherm with charge, to achieve the achievement of the test temperatures of 60ºC ± 2 and 99ºC ± 2, the temperature controller of the equipment must be set to 58ºC and 96,5ºC respectively. In each of these three stages favorable results were found, which allows us to conclude that the water bath equipment intended for homogeneous heating by thermal convection of the water according to the needs of the user in the quality control area of a national pharmaceutical laboratory is qualified
Discipline: Farmacia
Grade or title grantor: Universidad Nacional de Trujillo.Facultad de Farmacia y Bioquímica
Grade or title: Químico Farmacéutico
Register date: 11-Jul-2019



This item is licensed under a Creative Commons License Creative Commons