Look-up in Google Scholar
Full metadata record
Villanueva Sánchez, Jorge Arturo
Aredo Moya, Antonio Erick
Valverde Ponte, Armando
2017-04-27T17:20:03Z
2017-04-27T17:20:03Z
2016
https://hdl.handle.net/20.500.14414/7522
The hydraulic planning for irrigation this thesis considers the execution of a left bank canal which have the following characteristics: - Partidor: gate type concrete fc = 175 kg / cm2 with measures 0.70 x 0.70 m and a thickness of 0.15 m. - Left Bank Canal: concrete channel 0.60 x 0.60 m and 0.10 m thick. and a length of 6168.9 m. - Air Pass: concrete with iron mesh of 26.25 x 1.0 m and a thickness of 0.10 m. and 26.25 m in length. - Side Shot: concrete with stone masonry 0.90 x 0.30 m and a thickness of 0.10 m. - Posas dissipative: are of different concrete measures arming fc = 210 kg / cm2 for walls and floors, steel armor f'y = 4200 kg / cm2 and minimum cover of 4 cm. The development of this thesis aims to develop engineering studies, and the following scheme was taken into account: The topographic survey, taquimétrico uprising, fieldwork and cabinet for the generation of longitudinal profile that will provide the best location of water intakes and projected rectangular channel. The hydrological study to determine the maximum and minimum flow rates to provide us with the data for the design of irrigation canal. The description of the technical specifications, which are taken into account at the time of project implementation. The study of soil mechanics, their general, physical properties of the land where irrigation structures will be built. the metrado, costs and budget of this project is also described. the environmental impact study is also described to develop proper management in environmental management in the area where the work is performed. And finally the conclusions and recommendations that were reached following the development of this project are presented. (es_PE)
El planeamiento hidráulico para la presente tesis de riego contempla la ejecución de un canal margen izquierda las cuales tienen las siguientes características: - Partidor: tipo compuerta de concreto f'c = 175 kg/cm2 con medidas de 0.70 x 0.70 m y un espesor de 0.15 m. - Canal margen izquierda: canal de concreto de 0.60 x 0.60 m y un espesor 0.10 m. y una longitud de 6,168.9 m. - Pase aéreo: de concreto con malla de fierro de 26.25 x 1.0 m y un espesor de 0.10 m. y una longitud 26.25 m. - Toma lateral: de concreto con mampostería de piedra 0.90 x 0.30 m y un espesor de 0.10 m. - Posas disipadoras: son de diferentes medidas de concreto armando de f'c = 210 kg/cm2 para muros y pisos, armadura de acero de f'y = 4200 kg/cm2 y recubrimiento mínimo de 4 cm. La elaboración de esta tesis contempla la realización de estudios de ingeniería, y se tuvo en cuenta el siguiente esquema: El estudio topográfico, levantamiento taquimétrico, trabajo de campo y de gabinete para la generación del perfil longitudinal que proporcionará la mejor ubicación de las bocatomas y del canal rectangular a proyectarse. El estudio hidrológico para determinar los caudales máximos y mínimos que nos proporcione el dato para el diseño del canal de riego. La descripción de las especificaciones técnicas, las que se tendrá en cuenta en el momento de la ejecución del proyecto. El estudio de mecánica de suelos, sus generalidades, propiedades físicas del terreno donde se construirán las estructuras de riego. También se describe el metrado, los costos y el presupuesto de este proyecto. Se describe también el estudio de impacto ambiental para desarrollar una adecuada gestión en el manejo ambiental en el área donde se ejecutan los trabajos. Y por último se presentan las conclusiones y recomendaciones a las que se llegó como consecuencia del desarrollo del presente proyecto. (es_PE)
Tesis (es_PE)
spa (es_PE)
Universidad Nacional de Trujillo (es_PE)
TAGC;143
info:eu-repo/semantics/openAccess (es_PE)
http://creativecommons.org/licenses/by-nc-nd/2.5/pe/ (es_PE)
Universidad Nacional de Trujillo (es_PE)
Repositorio institucional - UNITRU (es_PE)
Mejoramiento, rehabilitación, canal, riego (es_PE)
Mejoramiento y rehabilitación del canal de regadío Carabamba margen izquierda, Distrito de CARABAMBA, Provincia de JULCÁN, Departamento de LA LIBERTAD (es_PE)
info:eu-repo/semantics/bachelorThesis (es_PE)
Universidad Nacional de Trujillo. Facultad de Ciencias Agropecuarias (es_PE)
Agricola (es_PE)
Título Profesional (es_PE)
Ingeniero Agrícola (es_PE)
Pública



This item is licensed under a Creative Commons License Creative Commons