Look-up in Google Scholar
Full metadata record
Purizaga Fernández, Ismael
Custodio Bobadilla, Luis Miguel
Yupanqui Carbajal, Daniel Josue
2019-06-07T17:14:30Z
2019-06-07T17:14:30Z
2019-06
https://hdl.handle.net/20.500.14414/12682
In this investigation, the effect of the annealing time in an ASTM A536 nodular cast iron on the tensile strength, yield stress, ductility, hardness and microstructure was studied. For this reason, cylindrical bars with a diameter of 15 mm x 200 mm in length manufactured by the company Foundry to Laminate SAC - Lima were used. They were annealed at 880 ° C at times of 5, 10, 15, 20, 25, 30 and 35 hours with slow cooling (inside the furnace). The specimens were machined from the annealed bars, for the tensile test according to ASTM E8-98 and for the hardness test according to ASTM E-140. The experimental results show that the increase of the annealing time causes the tensile strength to decrease from 492.00 MPa for 5 hours to 312.00 MPa for 35 hours. The yield stress decreases from 334.70 MPa for 5 hours to 263.00 MPa for 35 hours and with respect to ductility, it increases from 8.10% for 5 hours to 18.50% for 25 hours. Then it decreases slightly to 15.70% for 35 hours, this due to the decomposition of austenite into ferrite. The microstructural results show that for the times of 5, 10, 15 and 20 hours the decomposition of the austenite to ferrite is partially and microstructurally of ferrite, some of pearlite and graphite (Gn); while for all 25, 30 and 35 hours the transformation of austenite to ferrite is totally and microstructurally consists of ferrite, and graphite nodules (Gn), characteristic of a ferritic nodular function. It is also established that the minimum annealing time at 880 ° C for obtaining a ferritic nodular cast iron is 25 hours and that with the graphite (Gn) in any treatment always stable. It is concluded that the annealing time at 880 ° C with slow cooling, significantly affects the tensile strength, yield stress, ductility and hardness, and the microstructure in a nodular cast iron ASTM A536, according to the statistical analysis with 95% reliability (es_PE)
En esta investigación se estudió el efecto del tiempo de recocido en una fundición nodular ASTM A536, sobre la resistencia a la tracción, tensión de fluencia, ductilidad, dureza y microestructura. Para tal motivo se utilizó barras cilíndricas de diámetro 15 mm x 200 mm de longitud fabricados por la empresa Fundición Laminar SAC – Lima. Los cuales fueron recocidos a 880°Ca los tiempos de 5, 10, 15, 20, 25, 30 y 35 horas con enfriamiento lento (dentro del horno). Las probetas fueron maquinadas de las barras recocidas, para el ensayo de tracción según norma ASTM E8-98 y para el ensayo de dureza según norma ASTM E-140. Los resultados experimentales muestran que el incremento del tiempo de recocido hace que la resistencia a la tracción disminuya desde 492.00 MPa para 5 horas hasta 312.00 MPa para 35 horas. La tensión de fluencia disminuye desde 334.70 MPa para 5 horas hasta 263.00 MPa para 35 horas y con respecto a la ductilidad, ésta aumenta desde 8.10% para 5 horas hasta 18.50% para 25 horas. Luego disminuye ligeramente hasta 15.70% para 35 horas, esto debido a la descomposición de la austenita en ferrita. Los resultados microestructurales muestran que, para los tiempos de 5, 10, 15 y 20 horas la descomposición de la austenita a ferrita es parcial y microestructuralmente de ferrita, algo de perlita y de grafito (Gn); mientras que para todos los tiempos 25, 30 y 35 horas la transformación de la austenita a ferrita es total y microestructuralmente consta de ferrita, y nódulos de grafito (Gn), característica de una función nodular ferrítica. También se establece que el tiempo de recocido mínimo a 880°C para la obtención de una fundición nodular ferrítica es 25 horas y que con el grafito (Gn) en cualquier tratamiento siempre estable. Se concluye que el tiempo de recocido a 880°C con enfriamiento lento, afecta significativamente la resistencia a la tracción, tensión de fluencia, ductilidad y dureza, y y la microestructura en una fundición nodular ASTM A536, según el análisis estadístico con un 95% de confiabilidad (es_PE)
Tesis (es_PE)
spa (es_PE)
Universidad Nacional de Trujillo (es_PE)
Tmet;Tmet
info:eu-repo/semantics/openAccess (es_PE)
http://creativecommons.org/licenses/by-nc-nd/2.5/pe/ (es_PE)
Universidad Nacional de Trujillo (es_PE)
Repositorio institucional - UNITRU (es_PE)
Fundición nodular, recocido (es_PE)
Efecto del tiempo de recocido en una fundición nodular astm a536 sobre la resistencia a la tracción, tensión de fluencia, ductilidad, dureza y microestructura (es_PE)
info:eu-repo/semantics/bachelorThesis (es_PE)
Universidad Nacional de Trujillo. Facultad de Ingeniería (es_PE)
Ingeniería (es_PE)
Título Profesional (es_PE)
Ingeniero Metalúrgico (es_PE)
Pública



This item is licensed under a Creative Commons License Creative Commons